WEBVTT

00:00.655 --> 00:02.618
[SPEAKER_03]: Let's get ready to take me!

00:20.014 --> 00:24.155
[SPEAKER_05]: beautiful people of the knife talk podcast audience.

00:24.615 --> 00:29.457
[SPEAKER_05]: I got to say you probably have to be a fucking genius to be listening to this podcast.

00:29.477 --> 00:38.900
[SPEAKER_05]: That sounds sarcastic, but it is a smart move because we're here to keep you company in the shop on your commute, answer your questions, trouble shoot, trouble shoot life.

00:39.860 --> 00:59.385
[SPEAKER_05]: And just help keep you company and put a smile on your face and help pass the time because some of this work and some of the driving I'm sure I think a lot of people listen while they're driving kids headphones by the way heads up They're probably gonna be a lot of swearing because they're always this anyways We're here to help pass the time keep you company and keep you happy.

00:59.546 --> 01:01.626
[SPEAKER_05]: So Thank you for joining us.

01:01.766 --> 01:02.506
[SPEAKER_05]: I'm Mark and Mama.

01:02.526 --> 01:02.706
[SPEAKER_05]: See you.

01:02.766 --> 01:08.288
[SPEAKER_05]: I'm here with Craig Lockwood and Jeff Fader and we're just here to have a good time How you guys doing?

01:09.512 --> 01:09.773
[SPEAKER_03]: Good.

01:10.275 --> 01:10.617
[SPEAKER_03]: Tired.

01:11.159 --> 01:11.561
[SPEAKER_03]: That.

01:12.420 --> 01:39.449
[SPEAKER_03]: tired too, exactly destroyed, destroyed, beaten down, roughed up, fucked up, fucked up, come on, be it back to my feet, ladies and jerks, in fact, my feet, started over the years, over the years, we've morphed into the beginning of every show, talking about our ailments, how tired we are, and yeah, we're aging, people can see it in real time, oh yeah, they

01:42.971 --> 01:44.252
[SPEAKER_04]: Oh, I was gonna do an accident.

01:44.352 --> 01:45.633
[SPEAKER_04]: Don't do it.

01:45.653 --> 01:46.034
[SPEAKER_04]: Don't do it.

01:46.254 --> 01:46.935
[SPEAKER_03]: Don't do it.

01:49.142 --> 01:50.082
[SPEAKER_03]: Yeah, you're the cheese.

01:50.122 --> 01:58.865
[SPEAKER_05]: No, you're eating accents fucking rough, buddy This is my agent accent agent.

01:59.025 --> 02:01.066
[SPEAKER_05]: Oh, yeah, yeah, yeah, but like Jeff.

02:01.186 --> 02:09.469
[SPEAKER_04]: I am so so tired I think it's it's just getting darker earlier and it's playing tricks on my mind And I'm waking up early.

02:09.549 --> 02:11.890
[SPEAKER_04]: It's just oh terrible terrible no good.

02:12.410 --> 02:12.890
[SPEAKER_04]: Oh good at all

02:13.230 --> 02:13.971
[SPEAKER_03]: What have you been up to?

02:15.913 --> 02:16.793
[SPEAKER_04]: Watch in mobland.

02:17.794 --> 02:18.535
[SPEAKER_04]: Oh yeah.

02:18.555 --> 02:19.095
[SPEAKER_04]: So good.

02:19.336 --> 02:20.216
[SPEAKER_04]: You sell us a mess.

02:20.316 --> 02:21.097
[SPEAKER_04]: Oh good.

02:21.778 --> 02:22.879
[SPEAKER_04]: So, so good.

02:23.099 --> 02:25.201
[SPEAKER_04]: Yeah, so I'm coming to the end of the first season now.

02:25.401 --> 02:27.523
[SPEAKER_04]: And we're going to talk about this later.

02:27.843 --> 02:28.344
[SPEAKER_04]: Let's start with it.

02:28.364 --> 02:30.005
[SPEAKER_04]: We need to talk about knives I suppose.

02:31.046 --> 02:32.668
[SPEAKER_04]: Although, there's some knife action in it.

02:32.808 --> 02:33.388
[SPEAKER_04]: So, yeah.

02:33.809 --> 02:34.649
[SPEAKER_04]: You ready for my time?

02:34.709 --> 02:35.690
[SPEAKER_04]: Yeah, impression.

02:36.291 --> 02:36.611
[SPEAKER_04]: Do it.

02:36.771 --> 02:37.172
[SPEAKER_04]: Go for it.

02:38.373 --> 02:38.593
[SPEAKER_04]: Hmm.

02:41.010 --> 02:41.410
[SPEAKER_03]: That's it.

02:41.531 --> 02:42.853
[SPEAKER_03]: It's really good.

02:43.834 --> 02:44.936
[SPEAKER_03]: Just the grunts and laughs.

02:44.956 --> 02:49.663
[SPEAKER_03]: How is Halloween and how is Halloween your whales?

02:52.747 --> 02:54.048
[SPEAKER_04]: Um, it was okay actually.

02:54.068 --> 02:54.268
[SPEAKER_04]: Yeah.

02:54.288 --> 02:58.689
[SPEAKER_04]: We went to a local town where they did this fireworks night tonight as well.

02:58.989 --> 03:04.552
[SPEAKER_04]: I obviously don't have it over there, but November the fifth for us is fireworks night is when Parliament was blown up and so on.

03:04.612 --> 03:06.772
[SPEAKER_04]: So big fireworks night.

03:07.073 --> 03:11.794
[SPEAKER_04]: Um, but because it landed on the weekend of Halloween as well, it was like a double in one.

03:12.254 --> 03:18.797
[SPEAKER_04]: So yeah, we went to a local town there like a big fair on and they had fun fair rides and they had the, you know, the

03:20.617 --> 03:22.659
[SPEAKER_04]: The fireworks and the rockets and all that kind of stuff.

03:22.679 --> 03:31.927
[SPEAKER_04]: So now it was good, but today yeah today's just quiet one because it's you know it's a school school day today So yeah, so we haven't celebrated today, but we do in the weekend and it was good.

03:32.007 --> 03:32.428
[SPEAKER_04]: It was good.

03:32.448 --> 03:35.951
[SPEAKER_04]: Yeah, to be I broke one of the the kids on a ride.

03:35.971 --> 03:42.376
[SPEAKER_04]: They wanted to go on one of the big rides So so okay, come on come on with you the minute it started She was like, get me off give me off this tears

03:46.623 --> 03:55.937
[SPEAKER_04]: It was, I can explain it, you sort of sit, you all sit next to each other, like, horizontally, and it goes rounded circles, but you stay horizontal.

03:56.678 --> 03:59.002
[SPEAKER_04]: Yeah, we call that the Gravertron here.

04:00.107 --> 04:02.028
[SPEAKER_04]: Yeah, yeah, I suppose yeah, I don't make sense.

04:02.548 --> 04:02.848
[SPEAKER_04]: Yeah.

04:02.928 --> 04:03.288
[SPEAKER_05]: Yeah.

04:03.528 --> 04:04.689
[SPEAKER_05]: It's like, oh shit.

04:04.809 --> 04:11.511
[SPEAKER_05]: I totally lost the word, but when they're separating like solids from liquids in like chemistry, it's like one of those.

04:11.671 --> 04:13.711
[SPEAKER_05]: E. I know you mean yeah.

04:13.851 --> 04:14.652
[SPEAKER_05]: Center for you.

04:15.412 --> 04:16.472
[SPEAKER_05]: Center for you.

04:16.712 --> 04:17.573
[SPEAKER_04]: Center for you.

04:18.353 --> 04:19.553
[SPEAKER_04]: She hated every second.

04:19.773 --> 04:22.834
[SPEAKER_04]: Cry in and yeah, it was terrible, but, um, yeah.

04:23.155 --> 04:24.135
[SPEAKER_04]: But no, it was a good day.

04:24.155 --> 04:26.115
[SPEAKER_04]: They went out trick of treating beforehand and all the rest of it.

04:26.135 --> 04:27.116
[SPEAKER_04]: So yeah, no, it was all right.

04:28.940 --> 04:30.202
[SPEAKER_04]: Yeah, well, what else been going on?

04:30.422 --> 04:33.306
[SPEAKER_04]: Not much this week, it seems to have flown by.

04:33.567 --> 04:35.490
[SPEAKER_04]: It seems to have, like, yes, the day I was speaking to you guys.

04:35.530 --> 04:37.132
[SPEAKER_04]: So it's, yeah, and all the time.

04:37.152 --> 04:40.878
[SPEAKER_04]: It's happened in the US over the last week, but a lot less in my life.

04:41.018 --> 04:41.498
[SPEAKER_04]: A lot less.

04:44.082 --> 04:50.127
[SPEAKER_03]: Is this the episode where you start to say something and I'll get all the feedback about Don't talk politics guys.

04:50.147 --> 05:04.559
[SPEAKER_03]: This is my vacation, which was one of once a year once So once I say every six months Craig decides to start like pop it off I think it's something gets in your being your body and in your mind I can see your mind working.

05:04.599 --> 05:08.742
[SPEAKER_03]: It's just like this is my podcast I'll say whatever hell I want to say and you'll talk a little politics

05:09.603 --> 05:14.067
[SPEAKER_03]: And then we'll listen and I'll know that, you know, shitstorms on this way.

05:14.547 --> 05:22.154
[SPEAKER_03]: And I'll open up the feedback and they'll say, The best one was, I work really hard all day.

05:22.654 --> 05:26.517
[SPEAKER_03]: And I'm trying to go and listen to my favorite podcast.

05:26.537 --> 05:27.658
[SPEAKER_03]: That's my vacation.

05:28.098 --> 05:29.159
[SPEAKER_03]: That's my vacation.

05:29.440 --> 05:34.263
[SPEAKER_03]: And I don't want to hear you guys talk about politics on my vacation.

05:34.524 --> 05:35.464
[SPEAKER_03]: I'll never forget that.

05:35.505 --> 05:36.846
[SPEAKER_03]: And I just love that.

05:37.026 --> 05:38.127
[SPEAKER_03]: I love that so much, so.

05:38.975 --> 05:43.877
[SPEAKER_04]: I'll just say that that gift or that meme of Homer Simpson just walking back into the bushes.

05:43.937 --> 05:50.040
[SPEAKER_04]: Yeah, yeah, yeah, yeah, yeah, yeah, yeah, yeah, yeah, yeah, yeah, it's hilarious.

05:50.060 --> 05:52.882
[SPEAKER_03]: That's absolutely not.

05:53.522 --> 05:57.544
[SPEAKER_03]: I've never seen so many white men and suits get beat up on the streets like that.

05:57.824 --> 05:58.745
[SPEAKER_03]: That's a lot easier.

05:58.765 --> 06:01.046
[SPEAKER_03]: That's a Lexington Avenue aspect over there.

06:01.948 --> 06:02.908
[SPEAKER_03]: I'm like that.

06:02.968 --> 06:03.488
[SPEAKER_03]: Mitter.

06:04.209 --> 06:04.789
[SPEAKER_04]: Ah, mercy.

06:05.309 --> 06:05.589
[SPEAKER_04]: So.

06:05.649 --> 06:05.909
[SPEAKER_04]: Yeah.

06:06.749 --> 06:07.470
[SPEAKER_04]: But no, I'm okay.

06:07.610 --> 06:08.650
[SPEAKER_04]: Aside from that, I'm okay.

06:08.830 --> 06:10.271
[SPEAKER_04]: So yeah, what's been going on in your lives?

06:10.731 --> 06:11.351
[SPEAKER_03]: Rekko, how are you?

06:12.051 --> 06:12.691
[SPEAKER_05]: I'm doing a good.

06:14.332 --> 06:21.314
[SPEAKER_05]: I just wanted to add, I could see, so I broke Victor on his first big, like, fair ride on the exact same ride this year.

06:22.212 --> 06:23.413
[SPEAKER_05]: Yeah, okay.

06:23.453 --> 06:48.590
[SPEAKER_05]: I made sure we waited to have lunch until after and you talk it about going tricker treating before hand All like it's imagine is like whoever if it was Molly or Daisy if like the kaleidoscopic color Varnet coming out of this yeah, that would be such a bummer, but you Victor had the state He had the same sensation like at first he was like, okay, whatever, and then it started speeding up and he felt stuck to the wall

06:49.330 --> 06:51.211
[SPEAKER_05]: He's eyes got wide.

06:51.311 --> 06:54.273
[SPEAKER_05]: He was having a good time and also mildly terrified.

06:54.293 --> 06:56.314
[SPEAKER_05]: He's like, I don't understand.

06:56.334 --> 07:00.717
[SPEAKER_05]: So anyways, that was a good experience.

07:00.737 --> 07:03.178
[SPEAKER_03]: I'm glad that you guys did them.

07:03.298 --> 07:04.179
[SPEAKER_03]: I was smarter than that.

07:04.199 --> 07:05.379
[SPEAKER_03]: My dad did that to me.

07:05.399 --> 07:08.161
[SPEAKER_03]: I thought it was the most scum thing he could have possibly done.

07:08.761 --> 07:11.223
[SPEAKER_03]: And then when it was at my daughter's turn, we were like, what do you mean?

07:11.243 --> 07:11.864
[SPEAKER_05]: It's something.

07:12.024 --> 07:12.484
[SPEAKER_03]: What did he do?

07:12.524 --> 07:16.387
[SPEAKER_03]: To fucking drag me, I didn't want to go on the ride.

07:16.547 --> 07:17.888
[SPEAKER_03]: He dragged me on it anyway.

07:18.529 --> 07:20.090
[SPEAKER_03]: And I was fucking, it was terrible.

07:20.310 --> 07:20.891
[SPEAKER_03]: And I hated it.

07:21.471 --> 07:22.612
[SPEAKER_03]: And I don't like rides.

07:22.832 --> 07:23.613
[SPEAKER_03]: I don't like rides at all.

07:23.633 --> 07:24.754
[SPEAKER_03]: And I'm just like, you know, what's fun?

07:25.034 --> 07:27.736
[SPEAKER_03]: So we were Hershey Park with our friends from college.

07:27.756 --> 07:29.197
[SPEAKER_03]: You know, daughters were very young.

07:29.237 --> 07:31.859
[SPEAKER_03]: And Hillary's like, I'm going to take a lot on the fucking wildcat.

07:32.300 --> 07:34.281
[SPEAKER_03]: And I said, do what you're making.

07:34.301 --> 07:34.842
[SPEAKER_03]: It was a steak.

07:35.302 --> 07:57.577
[SPEAKER_03]: and she said it'll be fine and I said you're making a terrible mistake and she says it'll be fine she wants to do it she's in love and I said all right I said what I had to say you're making a mistake we have a picture from the wildcat they take a picture and all the parents are on their except for me and all the daughters who are like six are like pale white

07:58.257 --> 08:00.418
[SPEAKER_03]: Clutching everything, totally miserable.

08:00.598 --> 08:03.560
[SPEAKER_03]: She got off that, she was like, why would you put me on that thing?

08:03.580 --> 08:05.561
[SPEAKER_03]: I was just like, yeah, told you, made him a huge mistake.

08:06.001 --> 08:06.822
[SPEAKER_03]: She's a fader.

08:07.262 --> 08:10.523
[SPEAKER_03]: I passed on that generational trauma through her DNA.

08:11.184 --> 08:12.124
[SPEAKER_03]: Through the DNA.

08:12.144 --> 08:13.465
[SPEAKER_03]: Yeah, I knew that was happening.

08:13.545 --> 08:14.786
[SPEAKER_03]: I could see that a mile away.

08:15.686 --> 08:17.087
[SPEAKER_05]: To be clear, my daughter wanted it.

08:17.127 --> 08:19.287
[SPEAKER_05]: I didn't try their own cheap things to go on it.

08:19.928 --> 08:24.009
[SPEAKER_05]: Victor Victor is like, I want to do one of the big rides this year.

08:24.649 --> 08:29.771
[SPEAKER_05]: And so I gave him a few options that I thought were milder options because there are some that are too much.

08:30.591 --> 08:33.252
[SPEAKER_05]: And he chose the, yeah, the Gravitron thing.

08:33.412 --> 08:36.794
[SPEAKER_05]: I think it is actually technically called the Starship because it was enclosed.

08:37.434 --> 08:38.294
[SPEAKER_05]: There was another one.

08:38.314 --> 08:39.655
[SPEAKER_05]: It was almost the exact same ride.

08:39.815 --> 08:42.516
[SPEAKER_05]: Except for there was no lid.

08:43.336 --> 08:53.471
[SPEAKER_05]: and the whole platform like tilts it like a 35 degree angle as you're spinning yeah this did look yeah this did oh my god yeah i don't know if i could handle that right

08:57.261 --> 09:07.066
[SPEAKER_03]: I got one last ride story when I was very young there's a place New Jersey called Action Park, which is the most dangerous amusement park in the United States and during the 70s and 80s.

09:07.726 --> 09:11.828
[SPEAKER_03]: And it was terrifying to have done documentaries on how dangerous it was.

09:12.409 --> 09:21.093
[SPEAKER_03]: My sister and her husband, there was a boy from the time, took me there and made me get online with this water ride and we're on that, this life forever, it's going higher and higher and higher.

09:21.653 --> 09:27.738
[SPEAKER_03]: We get to the end, people are screaming, they're pretty miserable, and I turned to my brother, my sister's boyfriend.

09:27.838 --> 09:33.042
[SPEAKER_02]: I really don't want to do this, and he says, God damn it, we've been waiting on this line, you're going to do this god damn thing.

09:33.822 --> 09:41.628
[SPEAKER_03]: And I like to think of his son of a bitch, he's going to make me go on this god damn ride, and he did, and it was fucking horrible, and I never let him.

09:42.269 --> 09:43.750
[SPEAKER_03]: He's left his mortal vessel.

09:44.390 --> 09:46.372
[SPEAKER_03]: He's doing whatever you're doing.

09:46.632 --> 09:53.598
[SPEAKER_03]: You know live, but I let my sister remember my sister any time She talks about how my brother-in-law was a little cool to me.

09:53.638 --> 10:04.627
[SPEAKER_03]: I said you remember she tried dragging on like on the apartheid And she was like, I'll get for you never forget the mistakes I don't know what you can forget about it But I'll agree with the time nine

10:06.137 --> 10:09.121
[SPEAKER_05]: I was like almost 30, like almost 20 years older than me.

10:09.141 --> 10:09.261
[SPEAKER_05]: Yeah.

10:09.301 --> 10:09.441
[SPEAKER_05]: Yeah.

10:22.829 --> 10:25.011
[SPEAKER_04]: You little whimp, little whimp.

10:25.432 --> 10:28.475
[SPEAKER_04]: I claim to be this big tough, big tough New York guy.

10:28.535 --> 10:31.639
[SPEAKER_04]: You know, I thought you were my top-off who my birdies.

10:31.959 --> 10:33.761
[SPEAKER_03]: Do I ever tell you the little whimp story?

10:34.142 --> 10:36.244
[SPEAKER_03]: Do I ever tell you the little whimp story now or going to eat it?

10:36.264 --> 10:37.866
[SPEAKER_03]: You've now you've got a good story.

10:37.926 --> 10:39.828
[SPEAKER_03]: I've had a lot of my uncle and a trauma.

10:40.048 --> 10:45.412
[SPEAKER_03]: My uncle took me to an islanders game and Madison Square Garden when I was very young.

10:45.452 --> 10:45.993
[SPEAKER_04]: Talkie, right?

10:46.273 --> 11:08.531
[SPEAKER_03]: Hockey, and he got us tickets in the blue section, which is the highest, the nose blade seats, where it was rough, and they were smoking, and people were drunk, and it was going crazy, and we were up on the glass, and I was putting my arms up to sea, so far away, and I heard in the background, hey, little whip.

11:09.211 --> 11:16.417
[SPEAKER_03]: Get off the glass or we're gonna throw you over the side and I turned to my uncle and I said We better go and he said what are you talking about?

11:16.437 --> 11:25.906
[SPEAKER_03]: I said I don't feel I don't I'm I'm scared we should go so we went home my mother opens it or she goes Jeffrey you you you guys were you guys are supposed to be at the game We're watching the game on TV.

11:25.966 --> 11:32.852
[SPEAKER_03]: It's not over why you go my uncle Because I know Jeff got a little upset some guy yelled at him and she said pull Jeffrey what did he say?

11:33.392 --> 11:37.715
[SPEAKER_03]: And they said, some guy said, hey, you little whip, I'm gonna throw you over the side.

11:38.035 --> 11:41.357
[SPEAKER_03]: And my mother said, well, well, how do you know they were talking to you?

11:41.717 --> 11:44.179
[SPEAKER_03]: And I said, because I was, you know, we little whipped there.

11:44.199 --> 11:46.660
[SPEAKER_03]: That's a classic.

11:46.680 --> 11:47.781
[SPEAKER_03]: That's a classic story.

11:47.801 --> 11:49.782
[SPEAKER_03]: So, I only tell the truth, Craig.

11:49.802 --> 11:51.023
[SPEAKER_03]: I only tell the truth.

11:51.343 --> 11:52.624
[SPEAKER_04]: I'm like an anti-therapist.

11:52.684 --> 11:53.224
[SPEAKER_04]: I like that.

11:53.305 --> 11:54.205
[SPEAKER_04]: That's a sad story.

11:54.285 --> 11:55.346
[SPEAKER_04]: That's a great story.

11:55.586 --> 11:56.527
[SPEAKER_03]: That's a great story.

11:56.567 --> 11:57.847
[SPEAKER_03]: I mean, that's a classic.

11:57.927 --> 11:58.948
[SPEAKER_03]: That's a classic guy.

11:59.028 --> 12:00.349
[SPEAKER_02]: Who'd be a little whipped there?

12:02.675 --> 12:03.556
[SPEAKER_04]: Okay, there's the title.

12:03.636 --> 12:05.217
[SPEAKER_04]: The only little wimp there.

12:05.237 --> 12:06.337
[SPEAKER_03]: I'd be only little wimp there.

12:06.357 --> 12:07.538
[SPEAKER_04]: Okay, there you go.

12:07.558 --> 12:08.139
[SPEAKER_04]: Good job.

12:10.640 --> 12:11.381
[SPEAKER_03]: Rekka, how you doing?

12:12.121 --> 12:12.802
[SPEAKER_05]: I'm doing all right.

12:13.442 --> 12:14.563
[SPEAKER_05]: Let's see what's going on.

12:15.444 --> 12:18.646
[SPEAKER_05]: I, uh, yeah, I've just been kind of to learn on the shot.

12:18.666 --> 12:21.488
[SPEAKER_05]: I had a lot of stuff going on outside of the shop this last week.

12:22.889 --> 12:24.350
[SPEAKER_05]: But I have a knife.

12:24.470 --> 12:26.691
[SPEAKER_05]: I've actually been sitting on for years.

12:26.711 --> 12:27.952
[SPEAKER_05]: I actually have lots of these knives.

12:28.710 --> 12:36.059
[SPEAKER_05]: that I've been sitting on for years that I'm going to just finish start slowly going through them and finish in them up.

12:36.119 --> 12:39.403
[SPEAKER_05]: So this one has like a zebra pattern on it.

12:39.483 --> 12:41.966
[SPEAKER_05]: At one point, the blade was like gold plated.

12:41.986 --> 12:44.910
[SPEAKER_05]: I was like experimenting with gold plating on knives.

12:45.891 --> 12:47.052
[SPEAKER_05]: And so.

12:48.052 --> 12:50.373
[SPEAKER_05]: But that's about it, not a whole lot, really.

12:50.393 --> 13:07.421
[SPEAKER_05]: I am trying to, I've been really distracted with my life outside of the shop, but I am trying to get somebody lined up for my Patreon for the podcast that I do through the Patreon, which is the Artisan's Asteal Podcast.

13:08.042 --> 13:16.626
[SPEAKER_05]: I'm gonna start just banking episodes and then eventually start putting them out, but right now I need to start just doing, having interviews, holding those interviews,

13:17.606 --> 13:24.712
[SPEAKER_05]: The back side the back end stuff that like like the proxion side of things is beyond My current capabilities.

13:24.752 --> 13:34.240
[SPEAKER_05]: I'm sure I could figure it out, but with everything else going on It's just another fucking thing and so at least I can do is just have a conversation which I'm perfectly capable of

13:35.060 --> 13:41.663
[SPEAKER_05]: Um, but outside of that, it's just gonna have to sit, but other than that, uh, yeah, no, life's good.

13:41.703 --> 13:47.745
[SPEAKER_05]: Get ready for the halt like Thanksgiving's coming up really and only just a couple weeks.

13:47.765 --> 13:50.166
[SPEAKER_05]: It feels like it's, it's already, it's almost here.

13:50.186 --> 13:51.106
[SPEAKER_05]: It's crazy.

13:53.028 --> 13:54.589
[SPEAKER_05]: But what about you Jeff?

13:54.649 --> 13:57.991
[SPEAKER_05]: You sound you see you're saying you're feeling exhausted.

13:58.111 --> 14:15.402
[SPEAKER_03]: Well, I'm I'm exhausted in a positive way A couple we used we did a black Friday sale last year and then this year Allison had the idea to do our 25% off sale for the Halloween weekend and it's so it was like the greatest decision

14:16.042 --> 14:20.365
[SPEAKER_03]: because it was, there was no competition in regards to sales.

14:20.885 --> 14:24.688
[SPEAKER_03]: We got more traffic and more sales than we've ever had in any sale.

14:24.728 --> 14:29.291
[SPEAKER_03]: We only did it for a week and it was madness and it's still madness.

14:29.311 --> 14:39.498
[SPEAKER_03]: So I was in the shop, Friday, sending knives and sharpening and shipping and Friday, Saturday, Sunday and then all this week it's just been like, go, go, go.

14:39.538 --> 14:41.220
[SPEAKER_03]: So we're trying to kind of come out of,

14:41.860 --> 14:44.001
[SPEAKER_03]: This, you know, really, it was great.

14:44.061 --> 14:46.683
[SPEAKER_03]: And thank God, it was before the midterms.

14:47.303 --> 14:52.467
[SPEAKER_03]: Thank God, I don't think, I think it was a complete, it's just not even thinking about it.

14:52.887 --> 14:58.690
[SPEAKER_03]: We were just thinking about just trying to get out of having to compete with everybody with, you know, Black Friday.

14:58.710 --> 15:00.111
[SPEAKER_03]: This was it.

15:00.431 --> 15:09.297
[SPEAKER_03]: And now the best part is, is it'll take us a couple of weeks to catch up, but we'll be able to still take on orders for, you know, we're going to be able to

15:09.557 --> 15:12.698
[SPEAKER_03]: all of them are going to go out with the next couple of weeks, which I'm psyched about.

15:13.138 --> 15:19.019
[SPEAKER_03]: And then we'll still have enough time to fulfill Christmas orders throughout November, December.

15:19.059 --> 15:23.100
[SPEAKER_03]: So it was like, God damn, it was so good that it was before that.

15:23.320 --> 15:28.501
[SPEAKER_03]: Because if it was this weekend, during, you know, right after the midterms, I don't think, I mean, we wouldn't got shit.

15:28.561 --> 15:31.322
[SPEAKER_03]: I think everybody was like, just dead from the internet.

15:32.282 --> 15:42.145
[SPEAKER_05]: Right, well, I also, I just saw a post that was talking about how like the US stock market just dropped like 2.5 trillion No, I mean it went up yet.

15:42.205 --> 15:44.445
[SPEAKER_03]: It went up yesterday after the after the results.

15:45.146 --> 15:48.566
[SPEAKER_03]: Okay, stock market went crazy high after the results.

15:48.987 --> 15:50.487
[SPEAKER_05]: Oh, okay Maybe a misread that then

15:51.335 --> 15:52.495
[SPEAKER_03]: Yeah, no, no, that was great.

15:52.675 --> 15:56.876
[SPEAKER_03]: So, but yeah, it was not, it was not.

15:56.896 --> 16:02.938
[SPEAKER_03]: So now, I just, today's Thursday, I just sent out 11 orders, which was really good.

16:02.978 --> 16:16.481
[SPEAKER_03]: And now I, before we start doing this, I'm packing up to go down to Center for Medal Arts and we can teach the friction folder class and I got a nice message for Pat Quinn from there, saying, asking if I could take two more students, we have a full class, and then we're gonna add two more in.

16:16.501 --> 16:18.362
[SPEAKER_03]: I said, you got to fucking make the mess, let's do it.

16:19.148 --> 16:31.979
[SPEAKER_03]: So after we do this, I get to run some errands and then tomorrow morning, I'm gonna run down a Pennsylvania that teaches class Saturday, Sunday, and then break back in the shop, Monday to just kind of like, you know, keep digging.

16:33.140 --> 16:34.622
[SPEAKER_03]: So yeah, I love it.

16:34.982 --> 16:36.103
[SPEAKER_03]: It's great.

16:36.383 --> 16:36.884
[SPEAKER_03]: It's great.

16:37.264 --> 16:37.685
[SPEAKER_03]: It's great.

16:37.705 --> 16:38.665
[SPEAKER_03]: I mean, I'm feeling good.

16:38.685 --> 16:44.691
[SPEAKER_03]: The only bad bad thing was I had a podcast at early this morning and I couldn't, you know, get a little bit of a workout in.

16:45.291 --> 16:51.433
[SPEAKER_03]: If that's the only thing that working out, you know, before we were recording, Merrack was talking about sleep patterns and stuff like that.

16:51.993 --> 17:03.075
[SPEAKER_03]: And I am like, I've been back on the Peloton for the past almost three months, and I have such energy through the day, and by the time I hit my head, it's the ground, and it hits the pillow, I'm like out.

17:03.135 --> 17:09.377
[SPEAKER_03]: So, I'm kind of like needing, needing to be able to kind of get some exercise and during the day.

17:09.497 --> 17:09.757
[SPEAKER_04]: Yeah.

17:10.097 --> 17:10.317
[SPEAKER_04]: Nice.

17:10.497 --> 17:10.717
[SPEAKER_04]: Right.

17:11.597 --> 17:14.838
[SPEAKER_04]: Well, I joined to gym, and I've been mocked every day by the bite of gym.

17:15.338 --> 17:15.558
[SPEAKER_04]: Why?

17:15.758 --> 17:32.603
[SPEAKER_04]: Right, so so on Mondays is it Monday's we take the the girls have football training and Buddy has Swimming straight after and they're like next to each other and there's a gym there as well So like well, I'll join the gym we can drop them off.

17:32.623 --> 17:33.323
[SPEAKER_04]: They can do their thing.

17:33.343 --> 17:35.023
[SPEAKER_04]: I can spend an hour there pick them up.

17:35.103 --> 17:36.264
[SPEAKER_04]: We're all good All good.

17:36.764 --> 17:38.024
[SPEAKER_04]: So that was what two weeks ago.

17:38.044 --> 17:41.385
[SPEAKER_04]: I joined Something's come up each Monday where I have been able to

17:42.065 --> 17:46.009
[SPEAKER_04]: But you've got to have this app for the gym, like to log when you're going to go and all the rest of it.

17:46.249 --> 17:48.251
[SPEAKER_04]: And I keep sending me a message, oh, it is in Hey Craig.

17:48.271 --> 17:49.151
[SPEAKER_04]: We haven't seen you yet.

17:49.452 --> 17:50.813
[SPEAKER_04]: Hey Craig, how are you feeling today?

17:50.853 --> 17:51.794
[SPEAKER_04]: You need to get to the gym.

17:51.874 --> 17:53.235
[SPEAKER_04]: And I'm just like, bam, go on.

17:55.257 --> 17:56.338
[SPEAKER_04]: Gilten, we into it.

17:56.398 --> 17:57.719
[SPEAKER_03]: So yeah, thank you, thank you.

17:57.739 --> 17:58.340
[SPEAKER_03]: I can do one.

17:58.880 --> 18:25.610
[SPEAKER_03]: I still use my Garmin watch that I used for the marathon last year, and if I don't do anything it'll send me a message saying, well, today was a pretty easy day, all of a sudden yeah, it was a easy day, it's my idea, you know, maybe you should move your fat ass, you know, say, oh, yeah, well, it doesn't say to move your fat ass, but it says, so it was an easy day, you should, you know, think about stretching or something, you know, it's just like, you know,

18:26.870 --> 18:32.392
[SPEAKER_04]: I stopped wearing my Apple Watch for similar reasons and and also to lead in the to-do lists, right?

18:32.772 --> 18:38.074
[SPEAKER_04]: Me and my wife used to have a shared to do list on our on our phones so she'd put things there and in with me to get done in the rest of it.

18:38.474 --> 18:41.375
[SPEAKER_04]: And after a month she was like, I haven't done any of those things.

18:41.455 --> 18:42.435
[SPEAKER_04]: I'm like, what things?

18:42.675 --> 18:46.196
[SPEAKER_04]: She said things wanted to do lists as I deleted that to lead to that.

18:47.837 --> 19:03.768
[SPEAKER_03]: I'll tell you one of the great things about the Garmin watch is it tells you when you have a text message, so if you're standing in front of the grinder and you think that you're getting a message, your watch will tell you to summarize the message and you don't have to stop.

19:04.248 --> 19:13.815
[SPEAKER_03]: That is the one thing I like the best or someone's calling, you can make that decision of whether or not it's worth turning everything off and taking your IPP off and all that shit.

19:17.621 --> 19:18.482
[SPEAKER_04]: Okay, cool, right.

19:18.582 --> 19:26.347
[SPEAKER_04]: Let's start with some questions, but before we do, let me tell everybody all about MaritimeKnife Supply.com, everything you need.

19:26.687 --> 19:29.549
[SPEAKER_04]: The belt's a 10% off, who buy a 10 pack.

19:29.650 --> 19:30.730
[SPEAKER_04]: There's no code needed for that.

19:30.750 --> 19:32.311
[SPEAKER_04]: It'll just work it out at the checkout for you.

19:33.152 --> 19:38.496
[SPEAKER_04]: Then the one stop shop for knife makers, steel belt, handle material, tools, forges, kills, and more.

19:38.836 --> 19:40.517
[SPEAKER_04]: Go take a look, MaritimeKnife Supply.com.

19:43.139 --> 19:44.140
[SPEAKER_04]: Okay, questions.

19:44.200 --> 19:45.562
[SPEAKER_04]: We get them.

19:46.222 --> 19:58.234
[SPEAKER_04]: If you've got a question for us, we are knife-talk podcast on Instagram, send them through to us and we'll add them to the list just as Eric Carnival, I think Eric Carnival has kind of all it.

19:58.715 --> 19:59.635
[SPEAKER_04]: Carnivali.

19:59.655 --> 20:00.737
[SPEAKER_04]: Carnivali, okay.

20:01.617 --> 20:02.978
[SPEAKER_04]: Flambour Flamboyant, okay.

20:03.598 --> 20:10.461
[SPEAKER_04]: How do we feel about using dollar store lep balm ideally the beeswark base stuff as a food safe finish for knives?

20:10.921 --> 20:13.982
[SPEAKER_04]: I was thinking it would probably work well and be very easy to apply.

20:14.862 --> 20:15.943
[SPEAKER_04]: Eric Carnivalet.

20:17.903 --> 20:20.745
[SPEAKER_05]: Or maybe just kind of law, but anyway, what do you guys think?

20:22.385 --> 20:24.226
[SPEAKER_03]: I mean, you know, why not?

20:26.225 --> 20:30.749
[SPEAKER_04]: Yeah, I suppose, would it be cheaper than buying a big a tub or something else?

20:31.130 --> 20:49.407
[SPEAKER_03]: I mean, you'd be, you know, I like to, I think that for me, I've been really focusing on using food safe waxes and I've been really using like food safe but your board wax lately with, uh, I don't really wax any of the G10 anymore and then I just kind of put wax on some

20:51.949 --> 20:54.592
[SPEAKER_03]: I guess in a pinch, if you want your fucking night smelly chapstick, I think it's great.

20:54.632 --> 21:10.651
[SPEAKER_03]: Cherry chaps, Dave flavored, the handle, the chaps, the handle, the chaps, the handle, the chaps, the handle, the chaps, the handle, the chaps, the handle, the chaps, the handle, the chaps, the handle, the handle, the chaps, the handle, the handle, the handle, the handle, the handle, the handle, the handle, the handle, the handle, the handle, the handle, the handle, the handle, the handle, the handle, the handle, the handle, the handle, the handle, the handle, the handle, the handle, the handle, the handle, the handle, the handle, the handle, the handle, the handle, the handle, the handle, the handle, the handle, the handle, the handle, the handle, the handle, the handle, the handle, the handle, the handle, the handle, the handle, the handle,

21:11.071 --> 21:11.952
[SPEAKER_03]: Vicks paper up.

21:12.232 --> 21:14.433
[SPEAKER_03]: I is Vicks paper of the menta flavor.

21:14.533 --> 21:17.094
[SPEAKER_03]: Oh, you're suggesting in the action.

21:17.514 --> 21:18.034
[SPEAKER_03]: Why is it?

21:18.254 --> 21:20.655
[SPEAKER_03]: What is the fatal spill like pectoral visible?

21:21.095 --> 21:22.056
[SPEAKER_03]: There you go.

21:23.076 --> 21:25.617
[SPEAKER_04]: So why are you saying a wax on G10 anymore?

21:25.677 --> 21:26.918
[SPEAKER_04]: Is it because it doesn't sort of...

21:27.178 --> 21:28.498
[SPEAKER_04]: It doesn't really do anything.

21:28.799 --> 21:29.639
[SPEAKER_04]: You know, it's basically...

21:29.659 --> 21:30.379
[SPEAKER_04]: I mean, a prince.

21:30.459 --> 21:30.799
[SPEAKER_04]: Yeah, yeah.

21:30.939 --> 21:32.580
[SPEAKER_03]: I mean, it's like trading that G10.

21:32.600 --> 21:33.761
[SPEAKER_03]: There's nothing to penetrate.

21:33.841 --> 21:36.662
[SPEAKER_03]: You know, and it's like... And the thing is, is like...

21:37.302 --> 21:54.935
[SPEAKER_03]: If I put wax, in the beginning stages, it looks good, but it wipes off and then sometimes what happens is it smears, if you get any dirt, especially if it's lighter, color G10s, any dirt, and if it gets on to the wax, everything looks dirty.

21:55.735 --> 22:22.045
[SPEAKER_03]: So I got to the point where I was just like, if we do a nice job sanding the G10 down, why don't we give it to them the way it's going to be for a long time, you know, as opposed to, you know, wear down and just what they're cleaning it and it's kind of like, you know, so I don't, yeah, I don't put it any, I mean, the hard part is is like certain colors that try to stay away from, like, why try to stay away from white when I can, because I know that it's just, you know, any kind of white always looks like shit after a while.

22:23.005 --> 22:30.607
[SPEAKER_03]: Um, but yeah, so I mean, I guess I think in a pinch why not use some bliss text, you know?

22:32.647 --> 22:34.908
[SPEAKER_03]: Fear the weeds.

22:34.948 --> 22:39.249
[SPEAKER_05]: Yeah, no, I think I think it's not necessarily it's not a bad move.

22:39.429 --> 22:42.190
[SPEAKER_05]: I will say it probably will never harden up.

22:42.870 --> 22:47.051
[SPEAKER_05]: So there will always be kind of like this residue on the blade.

22:47.951 --> 23:06.620
[SPEAKER_05]: but if you're using it on the blade and then this honestly the same thing on the handle I would in fact I unless the oil is or sorry the yeah actually either the oil or or a wax base or coating unless it hardens up or or polymerizes over time

23:08.842 --> 23:19.235
[SPEAKER_05]: or with a little bit of time or he even from the he gun I would not suggest putting that on the handle because what's going to end up happening is that it is just going to be like this greasy kind of

23:25.223 --> 23:38.733
[SPEAKER_05]: on the blade, I feel like it's less of concern, but on a handle, especially for safety of any kind of reason, whether it's just like controlling the blade because the handle is like slipping around in your hand or something like that.

23:39.073 --> 23:44.116
[SPEAKER_05]: I've tested lots of oils and waxes actually too, especially the waxes.

23:44.236 --> 23:49.080
[SPEAKER_05]: And there are just some that just never harden up or they have walnut oil and them, which is great.

23:49.520 --> 24:09.481
[SPEAKER_05]: because it polymerizes but walnut oil takes a long fucking time to polymerize like almost a month to fully like cure and polymerize which means if you put that on your handle it's it's gonna stay like like greasy kind of like this greasy feeling and I don't I'm not a fan of that but if you're putting it on the blade I'm less concerned but

24:10.122 --> 24:15.264
[SPEAKER_05]: it is something you want to keep in mind that will probably come off on your food when you're cutting stuff.

24:15.284 --> 24:22.626
[SPEAKER_05]: So as long as you're okay with that cherry blistax or the vaix vaix vaporum coming off on your food while you're cutting it up.

24:23.247 --> 24:23.747
[SPEAKER_05]: Go for it.

24:25.908 --> 24:26.768
[SPEAKER_04]: Okay, make sense.

24:28.068 --> 24:32.390
[SPEAKER_04]: Okay, um who we got an audio message from will lower?

24:33.377 --> 24:35.738
[SPEAKER_03]: We'll allow, yeah, let me get to that.

24:36.139 --> 24:47.105
[SPEAKER_03]: We'll allow us to have some message on Instagram at night talk podcast Instagram and he sent us this Audio message Hey nice talk.

24:47.325 --> 24:52.688
[SPEAKER_01]: This is a little hour from Alaska at 979's in the house I have a question about heat treatment this morning.

24:52.748 --> 24:56.450
[SPEAKER_01]: I was watching a video of our famous alert in Tom's about

24:58.919 --> 25:06.140
[SPEAKER_01]: At the amount of time that you can soak a knife in, he was talking about, for instance, I treat four knives at once.

25:06.780 --> 25:11.041
[SPEAKER_01]: I pull those knives out, could be a BL, it could be whatever, and I put it in the crunchy plate.

25:11.101 --> 25:26.664
[SPEAKER_01]: I'm concerned about getting that into the crunchy plate, like two knives, for instance, crunching in time, and the concern that I have between how long it tastes to get it from the kiln into the crunchy plate, as opposed to just leaving each knife in there

25:28.909 --> 25:33.732
[SPEAKER_01]: You know, one at a time into the quinching by he was seeing that time is not as important as temperature.

25:34.172 --> 25:38.094
[SPEAKER_01]: So for instance, 14C 28N is five minutes soak.

25:38.535 --> 25:46.920
[SPEAKER_01]: It sounds to me like I can leave those knives in there for 10 minutes or 15 minutes, and I may not actually have a factor on the hardness and the toughness.

25:46.940 --> 25:51.302
[SPEAKER_01]: He's actually said it might actually increase the hardness and toughness if you let it soak for a little longer.

25:51.322 --> 25:52.443
[SPEAKER_01]: It's just curious to know, I know.

25:52.923 --> 26:03.592
[SPEAKER_01]: Jeff, I know you use it, you'll be all quite a bit, and I've seen some of the videos of you quenching, curious to see your thoughts and you know opinions on that particular matter.

26:03.832 --> 26:06.615
[SPEAKER_01]: Appreciate it gentlemen, have a good one, sorry, one over a minute.

26:07.816 --> 26:09.577
[SPEAKER_03]: That's right, like I like when you apologize.

26:09.877 --> 26:11.219
[SPEAKER_03]: I'm sorry, I'm sorry.

26:11.399 --> 26:12.580
[SPEAKER_03]: Yeah, that's right.

26:13.769 --> 26:21.679
[SPEAKER_04]: I think, yeah, leaving things in to, I mean, if you think of your account that you have and it's got a thermostat on it, so it reads the temperature.

26:22.240 --> 26:29.689
[SPEAKER_04]: So that's the temperature of the generally if the air in the account, because you've got a little thermostat and you'll be like, okay, capsule or whatever they call them.

26:31.150 --> 26:43.155
[SPEAKER_04]: So when you open the oven, you might see the temperature drop, because the air will quickly change temperature, but the knife itself has got the solid mass, so that's going to hold onto a lot of the temperature.

26:43.175 --> 26:50.059
[SPEAKER_04]: The temperature is not dropping that much, so you don't have to worry about opening the oven to get one out and that kind of thing, put it with the gas to the soaking.

26:50.859 --> 27:02.469
[SPEAKER_04]: I think because you set a temperature that nice aren't going above that, so it's not like, for example, you put something in the oven, like some food in the oven to cook, and it'll burn if you're tasting that too long.

27:02.589 --> 27:05.932
[SPEAKER_04]: That's because of chemical reaction with the ingredients and the food stuff.

27:06.673 --> 27:10.116
[SPEAKER_04]: Still generally won't do that, it'll just hold that temperature.

27:11.677 --> 27:17.282
[SPEAKER_04]: Yeah, so if you leave it in that for hours and hours and hours, there could be some sort of chemical reaction, maybe something

27:19.064 --> 27:21.426
[SPEAKER_04]: If you don't even do it four knives, I don't think it's a concern at all.

27:21.726 --> 27:26.091
[SPEAKER_04]: Well, personally, the way I use to do knives, I would do sort of six to eight at times.

27:27.252 --> 27:33.358
[SPEAKER_04]: I don't think it's a huge issue and less you've got a count where it's really ramping up the temperature again.

27:33.398 --> 27:39.524
[SPEAKER_04]: So when the thermostat is getting cooler, you close the door again and it'll really ramp things up.

27:40.845 --> 27:46.709
[SPEAKER_04]: I mean, most modern, modern kills and thermostats that, you know, they're quite clever and they're quite wise.

27:46.889 --> 27:52.433
[SPEAKER_04]: So they won't overramp things too much, but if you maybe have got an older one, it may ramp things up.

27:52.453 --> 28:00.098
[SPEAKER_04]: The temperature may exceed what you wanted to, but generally that massive, you know, the metal that's in the oven will just hold its temperature quite nicely.

28:00.118 --> 28:02.039
[SPEAKER_04]: It's not going to go above too much.

28:02.119 --> 28:02.779
[SPEAKER_04]: You should be good.

28:03.960 --> 28:04.761
[SPEAKER_03]: What do you think, Rekko?

28:06.626 --> 28:15.845
[SPEAKER_05]: Yeah, I think it's all right to let it, I mean generally speaking, you don't want to be leaving it all in their all day, but for for quenching four knives, it should be fine.

28:16.927 --> 28:18.089
[SPEAKER_05]: I think I think.

28:19.533 --> 28:29.720
[SPEAKER_05]: If you can have multiple like aluminum plate quenches like quenching setups that would be great or maybe a little more ideal, especially if you're doing multiple knives at a time.

28:30.981 --> 28:40.328
[SPEAKER_05]: But with with the foil wrap around it, it's probably especially if you're using a foil wrap around it, it's probably going to be fine hanging out at the awesome atizing temperature.

28:41.768 --> 29:07.756
[SPEAKER_05]: And it'll, with a longer so it's the difference in performance between the first 9th question, the fourth 9th quench is probably not going to be very much in regards to like the harden, harden ability and all that kind of stuff, but yeah, I think it's not necessarily a concern really to have them soaking or like the difference in time again, between the first one and the fourth one.

29:08.729 --> 29:21.188
[SPEAKER_03]: If you soak a knife for a long time, does the carbon migration, do you lose more carbon, more often, if you're seeing it, you know, more carbon, the longer it stays in that particular temperature?

29:21.948 --> 29:50.343
[SPEAKER_05]: Yeah, so the carbon, or the carbon leaving the steel, which is typically a concern of high carbon steel blades, because we're typically heat treating in an ambient air oxygen rich environment, which is in the kiln, right, where the stainless steel is usually in a foil packet of some sort, which helps to reduce the oxygen that's readily available, and you can also do some things to reduce the amount of oxygen that's actually in those packets.

29:51.744 --> 30:05.903
[SPEAKER_05]: But with the open air heat treat, yeah, that is a concern because the carbon is moving within the steel pretty once it hits the critical temperature, which is typically around 12, what is it like, or sorry, 1325 or higher.

30:10.565 --> 30:20.416
[SPEAKER_05]: It's part of what that movement is doing is it wants to attach to free oxygen and in an open air environment, there's plenty of oxygen in there.

30:20.476 --> 30:22.618
[SPEAKER_05]: It's hot as fuck, but it's still oxygen.

30:22.918 --> 30:25.321
[SPEAKER_05]: And so it, it off gases.

30:25.361 --> 30:31.227
[SPEAKER_05]: The steel actually off gases carbon into the ambient air, which is what causes the decarberization.

30:32.088 --> 30:51.451
[SPEAKER_05]: To be clear that is not happening at an extremely fast plate rate, but it is happening, which is why we Like when we're making carbon steels and we're or sorry we're making Damascus or we're forging blades we want to work with like a steel that's a higher kind of a carbon content so that

30:52.512 --> 31:05.977
[SPEAKER_05]: By the time it were done forging or making our Damascus steel or whatever, and all that time exposed to high temperatures in oxygen or available oxygen, it's decarbonizing the steel, but you still have enough carbon left over for losing.

31:06.117 --> 31:06.997
[SPEAKER_03]: You can afford to lose some.

31:07.277 --> 31:08.998
[SPEAKER_05]: You can afford to lose some, right?

31:09.098 --> 31:15.820
[SPEAKER_05]: Yeah, so that you can you can get a still get a good heat treatment response from a heat treating process.

31:17.161 --> 31:37.059
[SPEAKER_05]: So, if you're using packets, the chances of the steel being completely depleted, especially the high temperatures at like 1950 to 2100 or whatever, that the stainless are being heat treated at, you're probably not losing carbon, but the bigger concern would be potentially be grain growth within the steel.

31:38.860 --> 31:59.797
[SPEAKER_05]: Allowing elements like Chromium and others help to actually slow that grain growth and also deepen deep in the hardening or the hardenability of that steel so that you have time to quench it, which is why plate quenching is perfectly acceptable versus needing to quench it super quick in like an oil or something like that.

32:01.762 --> 32:16.658
[SPEAKER_03]: I think that there's what I do is, I kind of like, obviously, I really might, my source for, he treatment is Dr. Lantern Thomas's book, Night of Engineering, which has recipes in the back for different ranges.

32:17.699 --> 32:35.715
[SPEAKER_03]: Um, what I've always done is I've always thought it was kind of dopey when you come up with a schedule for your heat treatment to stop, you know, let's say, let's brave, A-E-B-L, we've ramp it to 1950, hold it for 25 or hold it for 15 minutes, and then when that's over you just let the fuck in.

32:36.495 --> 32:37.756
[SPEAKER_03]: you let the oven turn off.

32:38.157 --> 32:39.838
[SPEAKER_03]: That to me has always been the dumbest thing.

32:39.858 --> 32:43.141
[SPEAKER_03]: So what I always do is I'll add an extra segment after.

32:43.161 --> 32:51.608
[SPEAKER_03]: If it's supposed to soak for 10 minutes, I'll add another segment of another 10 minutes just to make sure that the oven is wanting to stay hot after the soaked time.

32:52.228 --> 33:02.152
[SPEAKER_03]: Then what I'll do is, I'll only treat as many knives as I feel comfortable doing and I can also get into the doer of my liquid nitrogen.

33:02.592 --> 33:10.175
[SPEAKER_03]: I found out the hard way that six knives don't fit into the opening of the liquid nitrogen when you put them all together.

33:10.595 --> 33:15.497
[SPEAKER_03]: All of a sudden again, all of a sudden you got a little bit, you know, your opening is the size has changed.

33:16.037 --> 33:39.418
[SPEAKER_03]: So for like for if it's a pairing knife, I don't worry so much it's a small material and something I have a stack of plates and then I quench them all with air, get them into the liquid nitrogen as quickly as they can and then I'll do another round A, B, L doesn't need a 440C needs like different stages, A, E, B, L doesn't need different stages

33:39.958 --> 33:45.622
[SPEAKER_03]: But the most important thing is you got to get a rock wall and test, that's the way to kill the doubt.

33:45.662 --> 33:48.664
[SPEAKER_03]: You can use all the information the Dr. Lantern Thomas has.

33:49.085 --> 33:50.526
[SPEAKER_03]: You can try different things out.

33:50.586 --> 34:06.097
[SPEAKER_03]: Before I had a years ago, I used to think that the real way to heat treatment too, see if your heat treatment was well, is if after the knife was heat treatment tempered, if you've flexed it, if you've bent it or tried to bend it, if it flexed back, that was pretty a pretty good indication you did a good job.

34:06.517 --> 34:13.944
[SPEAKER_03]: Now, I constantly test with the Rockwell test or just to make sure that I'm in the range I want to be.

34:14.344 --> 34:23.192
[SPEAKER_03]: So, all the Rockwell testers, one of those things that we don't want to spend the money and we don't want to try to use the files.

34:23.212 --> 34:30.859
[SPEAKER_03]: But the files get soft, the files get caught up on the decarber, you get a false reading with the files, it's fine.

34:30.919 --> 34:33.302
[SPEAKER_03]: There's different things you can use, the chisels that

34:33.922 --> 34:37.145
[SPEAKER_03]: Matt Parkinson makes that they sell at marriage.

34:37.185 --> 34:54.358
[SPEAKER_03]: I'm nice to buy her terrific But a rock wall tester is gonna kind of like kill the doubt and that is what I would suggest Do you what you normally do and then cross check with the references that you use and then Ultimately you can always triple check with the rock wall tester

34:55.558 --> 34:58.621
[SPEAKER_04]: Yeah, yeah, I guess I'm calibrated steel for that as well.

34:58.641 --> 35:01.704
[SPEAKER_04]: So you know that you rock well test or is Oh, you kind of break you correctly.

35:01.744 --> 35:15.939
[SPEAKER_05]: Yeah, yeah, there's one obviously not a bad move to make sure all your stuff calibrated because sometimes over time Either the thermocouples not reading might not be reading the temperature properly for somewhere upwards of like

35:16.544 --> 35:19.486
[SPEAKER_05]: a couple hundred degrees, that's gonna make a difference in how you heat treat.

35:19.966 --> 35:22.268
[SPEAKER_05]: Like the kind of oil that you have, like, how old is it?

35:22.468 --> 35:23.608
[SPEAKER_05]: Is it really deteriorated?

35:23.648 --> 35:26.870
[SPEAKER_05]: And you're not getting the heat treating response or the hardening response out of it?

35:27.371 --> 35:29.512
[SPEAKER_05]: Like these are things that you gotta take in consideration.

35:29.532 --> 35:30.853
[SPEAKER_05]: It's not just the numbers too.

35:31.393 --> 35:32.634
[SPEAKER_03]: I've gone through speaking.

35:32.654 --> 35:33.995
[SPEAKER_03]: That's a great, great point.

35:34.215 --> 35:41.940
[SPEAKER_03]: I actually, because the even heat cells thermal couplers and they're very inexpensive, I think they're like 40 bucks for a new replacement thermal coupler.

35:42.520 --> 35:56.445
[SPEAKER_03]: I buy a few, because I'm always, I use my even heat for not only heat treating it's 1950, but I'm also using it to help stabilize the wood for stabilized wood at 200 degrees for a long period of time.

35:56.925 --> 36:02.147
[SPEAKER_03]: And one time I remember putting some wood in and the whole thing went, the fire is coming out, completely.

36:02.827 --> 36:09.649
[SPEAKER_03]: And the thermal coupler, you know, it's this little piece of filament that goes down and

36:12.290 --> 36:32.560
[SPEAKER_03]: little cone, little cylindrical pieces of the ceramic on there and then it fits on the top and then you kind of wired into it's super duper easy but sometimes those burn out like if the connection will break and then all of a sudden your oven will just start going like let's go as hard the pain as we can

36:33.120 --> 36:34.341
[SPEAKER_03]: everything starts to go crazy.

36:34.862 --> 36:40.526
[SPEAKER_03]: I've gotten to the point now where every few, you know, like every couple of years, I'll buy a couple of thermal couples.

36:41.007 --> 36:46.291
[SPEAKER_03]: And if I feel like I'm doing too much, you know, craziness, I'll just swap them out.

36:46.752 --> 36:52.497
[SPEAKER_03]: And that's what Spencer said to me, says, if you're going through for years and years of

36:53.077 --> 37:13.704
[SPEAKER_03]: high temperature and then low temperature like some of us are he treating and then dropping it down and doing the temper you if you're especially if you're doing high temperature steel like stainless you want to it's it's an inexpensive way to not have a problem by changing the thermal couple and then they sell directly to why is to why is two screws super simple

37:14.493 --> 37:20.418
[SPEAKER_03]: Yeah, even he, even he-kill.com, you can buy directly from, they sell and direct.

37:20.739 --> 37:25.543
[SPEAKER_03]: So you can just go get yourself a 40 bucks, it's just like, well, you know, kill the doubt once again.

37:25.883 --> 37:26.344
[SPEAKER_03]: Calibration.

37:26.584 --> 37:26.784
[SPEAKER_04]: Yeah.

37:27.505 --> 37:27.665
[SPEAKER_04]: Yeah.

37:27.845 --> 37:30.547
[SPEAKER_04]: Even he-tifin-kown.com, we all use even heets.

37:30.708 --> 37:31.308
[SPEAKER_04]: You should be too.

37:32.049 --> 37:32.549
[SPEAKER_04]: Okay.

37:32.749 --> 37:33.270
[SPEAKER_04]: That's a good one.

37:35.145 --> 37:37.346
[SPEAKER_04]: Yeah, 66 mounted nice.

37:37.366 --> 37:38.547
[SPEAKER_04]: Don't read that one, Maraco.

37:39.287 --> 37:42.689
[SPEAKER_05]: Yes, this is my friend Dan Hubs over it.

37:43.329 --> 37:46.651
[SPEAKER_05]: 66 Mount 9 or 66 because he's six foot six.

37:46.671 --> 37:49.012
[SPEAKER_05]: He's a giant, great dude.

37:49.572 --> 37:55.215
[SPEAKER_05]: After forging out of Damascus Knife, I will run the blade through a full annealing cycle in my evening.

37:55.775 --> 37:58.617
[SPEAKER_05]: Do I still need to thermal cycle the knife before annealing it?

37:59.477 --> 38:03.420
[SPEAKER_05]: or will the annealing cycle take care of all of that?

38:05.262 --> 38:13.488
[SPEAKER_05]: I would actually suggest doing your thermal cycling after an annealing process.

38:13.528 --> 38:24.116
[SPEAKER_05]: So what's happening is after you forge the Damascus, you're spending a lot of time at high temperatures and the grain growth goes crazy.

38:25.222 --> 38:42.267
[SPEAKER_05]: The kneeling part of the process of the kneeling is just kind of help relax the steel and kind of chill it out a little bit the material but that doesn't mean that the grain within the steel has is refined to a point that is ideal for a final hardening

38:43.515 --> 38:46.337
[SPEAKER_05]: to get that will help yield a tough knife.

38:47.118 --> 38:50.680
[SPEAKER_05]: The finer the grain and the steel, the tougher the knife, typically.

38:51.261 --> 38:57.345
[SPEAKER_05]: And so, not only do high temperatures, especially when we're forging Damascus,

38:58.145 --> 39:05.810
[SPEAKER_05]: cause grain growth, but grain growth happens in both directions, not only as you're going up in temperature, but as you're coming down in temperature.

39:06.371 --> 39:18.419
[SPEAKER_05]: And so what the thermal cycling does is you're crossing this critical temperature, what we typically refer to as the critical temperature, where the austenitidate, austenite, austenite, austenitic.

39:20.440 --> 39:43.570
[SPEAKER_05]: austenitic range starts and where which is like that 1325 number I was talking about so bands bouncing back and forth across that boundary between hot and cold through the thermal Cycling is going to help to refine the grain because each time you pass that boundary New grain starts to grow and so you're refining the grain as you pass it back and forth, which is why

39:44.270 --> 39:47.411
[SPEAKER_05]: heating and cooling it typically people do like three times.

39:47.671 --> 40:00.635
[SPEAKER_05]: That's that'll get you some decent grain refinement and it will also help set you up for a final hardening on the knife so that the grain is really nice and fine and then as you do your final hardening.

40:02.335 --> 40:02.555
[SPEAKER_05]: Yeah.

40:03.175 --> 40:08.918
[SPEAKER_05]: Carbon's also very nicely evenly distributed and all that good stuff.

40:09.118 --> 40:28.967
[SPEAKER_05]: I think the annealing annealing the steel, the Damascus after forging it is a great move even after forging the blade because sometimes when people are making Damascus and you'll see these beautiful Damascus knives but you'll see these kind of cloudy lines in the steel and

40:30.027 --> 40:41.632
[SPEAKER_05]: Those aren't what those are are carbon depleted areas that were probably at the outside of like a bar of Damascus like the parent bar before tiles were cut off.

40:41.712 --> 40:45.373
[SPEAKER_05]: You'll see this typically in mosaic bars or mosaic Damascus knives.

40:45.733 --> 40:50.976
[SPEAKER_05]: You'll see these cloudy lines in them and those are the well boundaries from the previous bar.

40:51.236 --> 40:56.358
[SPEAKER_05]: And what has happened or what hasn't happened is that the carbon hasn't had enough time

40:57.318 --> 41:05.353
[SPEAKER_05]: above critical for that carbon to kind of more evenly redistribute throughout the billet, throughout the blade, throughout the bar or whatever.

41:06.034 --> 41:06.435
[SPEAKER_05]: And so...

41:07.280 --> 41:21.331
[SPEAKER_05]: What happens is that the decarberized zones, those boundaries that were the outside where the forge scale and everything was on the previous iteration, didn't get a chance for that carbon kind of balance out throughout the blade.

41:21.351 --> 41:35.342
[SPEAKER_05]: So putting it through an annealing process, which is bringing up above critical and then it's low cool, that gives that steel that time it wants to allow that carbon to redistribute and even balance out throughout the material.

41:35.842 --> 41:38.224
[SPEAKER_05]: before then doing your final thermal cycling.

41:38.304 --> 41:40.205
[SPEAKER_05]: Thermal cycling shouldn't really take that well.

41:40.886 --> 41:52.454
[SPEAKER_05]: And it's not going to be enough time above temperature or going back and forth to allow that carbon to migrate throughout the material to even out that carbon distribution in the steel.

41:53.274 --> 42:02.724
[SPEAKER_05]: So doing that in healing process, especially if you're doing tile welds, where a lot of people are trying to do it as quickly as possible to reduce them out of carbon.

42:03.524 --> 42:08.890
[SPEAKER_05]: But what you're seeing those clouds is how slowly the carbon actually moves.

42:09.030 --> 42:16.657
[SPEAKER_05]: It moves so slowly that there are portions of the Damascus that stay decarberized even through the heat treating process.

42:17.610 --> 42:34.282
[SPEAKER_05]: Um, so, in Ewing helps that carbon to redistribute and then thermocycling will help to refine the grain so that when you do your final hardening on the knife, you have a nice fine grain structure that will help lend toughness to that steel.

42:36.404 --> 42:37.525
[SPEAKER_05]: Can't get much better than that.

42:38.605 --> 42:39.586
[SPEAKER_04]: You fucking did.

42:40.246 --> 42:42.308
[SPEAKER_04]: Ha ha ha ha ha.

42:44.324 --> 42:47.106
[SPEAKER_04]: Yeah, uh, brilliant.

42:47.386 --> 42:50.008
[SPEAKER_04]: Okay, uh, Dom Rob Knives.

42:50.929 --> 42:54.211
[SPEAKER_04]: No, no, five C forge, you know, he's got the next question.

42:54.571 --> 42:55.372
[SPEAKER_04]: He's got a dilemma.

42:56.032 --> 42:58.574
[SPEAKER_04]: Um, I've listened to all episodes of the podcast now.

42:58.994 --> 43:00.935
[SPEAKER_04]: I need a new podcast to listen to at work.

43:01.176 --> 43:02.757
[SPEAKER_04]: I'm also up to date with the full blast.

43:03.437 --> 43:04.938
[SPEAKER_04]: Um, any suggestions?

43:06.199 --> 43:07.340
[SPEAKER_05]: Well, I was talking about it earlier.

43:09.236 --> 43:10.538
[SPEAKER_05]: The artisans is stupid, okay.

43:10.558 --> 43:12.601
[SPEAKER_04]: Oh yeah, you gotta subscribe the artisans.

43:12.701 --> 43:15.406
[SPEAKER_03]: Yeah, yes, yes, get your mind right.

43:16.107 --> 43:16.848
[SPEAKER_05]: Get your mind right.

43:17.870 --> 43:19.011
[SPEAKER_05]: We've got some long episode.

43:19.031 --> 43:21.472
[SPEAKER_05]: There are some episodes that are like four hours long.

43:21.632 --> 43:22.373
[SPEAKER_03]: Yeah, crazy.

43:22.573 --> 43:24.855
[SPEAKER_03]: Oh Wow, that's crazy.

43:25.195 --> 43:26.456
[SPEAKER_05]: Yeah, some of those should have been three.

43:26.956 --> 43:28.937
[SPEAKER_03]: Yeah, but just three.

43:29.658 --> 43:38.804
[SPEAKER_05]: Oh my god But the thing is is like I'm going for an ultra long form because I'm thinking about guys in the shop

43:39.955 --> 43:51.561
[SPEAKER_05]: like hand-sanding a blade or grinding it like you're in the shop for more than two or like an hour and a half every day So you get a hold of their hand for like four hours They want to listen to it all the way to you.

43:51.601 --> 43:52.402
[SPEAKER_05]: They could break it up.

43:52.862 --> 44:04.748
[SPEAKER_05]: You know, they might get to point and like okay I need a break and go listen to some music or go listen to full blasts or go listen to whatever, you know Do you listen what what are the pods do you listen to you guys?

44:06.589 --> 44:07.810
[SPEAKER_04]: I don't listen to other pods

44:09.240 --> 44:13.264
[SPEAKER_05]: Like I just then I don't in general or I'd be a nice related podcast.

44:13.324 --> 44:26.054
[SPEAKER_03]: I'll be honest with you I stop listening to podcast a while ago because well number one I stop listening to Maker podcast because the guys are they're terrible They're all I just let's just cut the shit.

44:26.694 --> 44:31.739
[SPEAKER_03]: I know I know I'm gonna message from the Ryan don't worry The trustland grind is great.

44:31.759 --> 44:32.079
[SPEAKER_03]: I would do

44:32.499 --> 44:37.243
[SPEAKER_03]: But I also felt as though I was going to, I don't want to be influenced by the things that other people say.

44:37.704 --> 44:42.968
[SPEAKER_03]: So I've stopped listening to Maker Podcasts and I don't really think that I don't listen to comedy podcasts anymore.

44:43.508 --> 44:45.790
[SPEAKER_03]: I honestly, in this shop, we listen to Howard Stern.

44:46.131 --> 44:48.753
[SPEAKER_03]: So I have serious sex and we listen to Howard Stern every day.

44:49.233 --> 44:50.915
[SPEAKER_03]: I'm embarrassed, but not that embarrassed.

44:51.315 --> 44:52.456
[SPEAKER_03]: I love him so much.

44:52.996 --> 44:53.337
[SPEAKER_03]: So good.

44:55.518 --> 44:58.059
[SPEAKER_03]: How long has he just got like how long he already has that episode.

44:58.079 --> 45:16.663
[SPEAKER_03]: All right, so so what they do it they're smart while they recently change because now Howard's on HBO on on he's got he'll do he used to be five days a week Then it went down the three days a week and now it's one day week and what he does is he'll do a live show in Monday and then they'll replay it and then Tuesday they'll go through the archives

45:17.423 --> 45:42.013
[SPEAKER_03]: and listen to old shows and then Wednesday they'll do old shows so there's never it's not a lot of overlapping stuff there's a lot of I mean he's been doing it for 50 years so there's like 50 years of 40 some odd years of of of of content and I we just like I'm the laugh I think it's fucking funny I think he's the best interview he just had the you just had to lead singer fish on really good he had Sasha Baron Cohen on last week he's really good

45:42.673 --> 45:43.895
[SPEAKER_03]: And I just find it to be funny.

45:43.935 --> 45:44.676
[SPEAKER_03]: I just find it to be funny.

45:44.696 --> 45:46.558
[SPEAKER_03]: I just find it to be really funny That's great.

45:46.838 --> 45:48.560
[SPEAKER_05]: How long are the episodes?

45:48.640 --> 45:49.801
[SPEAKER_05]: Like how long does it show?

45:49.982 --> 45:50.582
[SPEAKER_03]: I'll show this.

45:50.903 --> 45:51.243
[SPEAKER_03]: Okay.

45:51.263 --> 45:59.252
[SPEAKER_03]: So the Monday show the Monday show starts at 7 and ends at close to 11 And then we're 10 at 10.

45:59.332 --> 46:03.577
[SPEAKER_03]: Yeah three four hours and then you know that obviously broken up with commercials and stuff like that

46:04.117 --> 46:22.179
[SPEAKER_03]: But then during the regular week, they'll do little, well, do best of for the rest of the week and it's like 40 years of funny content and then they'll It's just, you know, so it's just a channel, you know, it's not like a podcast, you just turn on the our channel So you're not supposed to long for him, it just depends on what it is

46:23.237 --> 46:25.559
[SPEAKER_03]: No, of course not, but I'll be honest with you.

46:25.699 --> 46:40.589
[SPEAKER_03]: I honestly believe that Joe Rogan has made this concept that more is, you know, more talking is better and a lot of podcasters now, especially in the maker community, have made it seem like there doesn't need to be a beginning middle and end.

46:41.429 --> 46:45.993
[SPEAKER_03]: And I think I would rather do a show where it's, you know, an hour and a half.

46:46.574 --> 46:52.379
[SPEAKER_03]: And then if I don't get to everything, then it makes me want to do another one with the same guy.

46:52.399 --> 46:54.721
[SPEAKER_03]: Maybe it didn't answer all the questions, but it was a good conversation.

46:55.281 --> 47:00.346
[SPEAKER_03]: It gives me reason to have him back, as opposed to just like, you know, carpet bombing everybody.

47:00.766 --> 47:02.027
[SPEAKER_03]: with like a pocket bombing.

47:02.047 --> 47:02.448
[SPEAKER_05]: What is that?

47:02.528 --> 47:11.196
[SPEAKER_03]: Wow, it's just like, sometimes I'm just, I'd rather be, you know, it's, it's personal preference, it's all, I'm with you, whatever you want.

47:13.118 --> 47:14.820
[SPEAKER_03]: I don't remember the last time I was in a podcast.

47:15.961 --> 47:17.142
[SPEAKER_04]: Yeah.

47:17.202 --> 47:18.203
[SPEAKER_04]: I'm going through phases.

47:19.608 --> 47:25.813
[SPEAKER_04]: Sorry, yeah, I'd just say I go through phases where I'll send to loads, then I go back to just listen to musical day and stuff like that.

47:25.913 --> 47:29.836
[SPEAKER_04]: And yeah, I don't really have any go-tos anymore.

47:30.857 --> 47:31.538
[SPEAKER_03]: You like the murders.

47:31.558 --> 47:35.121
[SPEAKER_04]: Generally, always the murder stuff, of course.

47:36.262 --> 47:42.206
[SPEAKER_04]: But to be honest, Netflix has that covered now, because there's like a new Netflix documentary every day about some serial killer.

47:42.507 --> 47:44.048
[SPEAKER_04]: So I get my fix there, you know.

47:44.548 --> 47:45.089
[SPEAKER_04]: But, um,

47:46.340 --> 47:59.566
[SPEAKER_04]: No, I can't think of anything, but what a general use podcast now, when I want to search or find out about something, if you do a search about the subject, you'll generally find an episode.

47:59.586 --> 48:04.588
[SPEAKER_04]: You're not generally subscribed to that show, but you'll find something where you learn something from it.

48:04.608 --> 48:08.029
[SPEAKER_04]: Yeah, almost using as a search engine, but

48:10.154 --> 48:11.475
[SPEAKER_04]: Yeah, yeah, nothing at the moment.

48:11.535 --> 48:14.397
[SPEAKER_04]: Nothing that's really, really, get me going.

48:14.637 --> 48:16.178
[SPEAKER_03]: You listed a lot of podcast break.

48:16.198 --> 48:16.858
[SPEAKER_03]: What do you listen to?

48:17.639 --> 48:18.559
[SPEAKER_05]: I don't listen actually.

48:19.300 --> 48:22.001
[SPEAKER_05]: A lot of, I don't listen to a wide variety of podcasts.

48:22.021 --> 48:25.543
[SPEAKER_05]: I listened to a, a diary of, what was it?

48:26.304 --> 48:27.385
[SPEAKER_05]: The diary of the CEO.

48:27.425 --> 48:28.425
[SPEAKER_05]: Yeah, yeah.

48:28.565 --> 48:31.967
[SPEAKER_04]: I really, I just became that the world's biggest podcast this week, apparently I've heard.

48:32.127 --> 48:32.648
[SPEAKER_04]: What, what?

48:32.708 --> 48:33.048
[SPEAKER_04]: Oh, really.

48:34.150 --> 48:36.693
[SPEAKER_04]: Yeah, go ahead.

48:37.214 --> 48:37.314
[SPEAKER_04]: One.

48:38.035 --> 48:38.416
[SPEAKER_04]: Oh, sorry.

48:38.776 --> 48:39.998
[SPEAKER_04]: It's some British guy.

48:40.038 --> 48:43.602
[SPEAKER_04]: He's on Dragon's Den over here, which is your shark tank.

48:43.722 --> 48:51.773
[SPEAKER_04]: But years and years ago, he sat this podcast, The Dory of a CEO, and he started just charting his day, and what he gets up to and not kind of shit.

48:52.414 --> 49:05.532
[SPEAKER_04]: But now he just gets interested in people on for chats, you know, he's great, but the ads are just like incessant, they're nonstop on it, but it literally became that the world's biggest subscribed podcast in the world this week.

49:05.933 --> 49:06.694
[SPEAKER_05]: Oh, that's interesting.

49:06.734 --> 49:08.677
[SPEAKER_05]: I hardly ever hear ads on that podcast.

49:09.812 --> 49:17.957
[SPEAKER_05]: I listen to it through Spotify, and I have a piece of Spotify account, and so I hear his sponsor reads.

49:18.597 --> 49:20.458
[SPEAKER_05]: But yeah, that's what I mean, his reads.

49:20.598 --> 49:20.858
[SPEAKER_05]: Yeah.

49:21.078 --> 49:22.779
[SPEAKER_05]: So not pretty quick, but his reads.

49:23.119 --> 49:24.360
[SPEAKER_05]: Yeah.

49:24.540 --> 49:25.641
[SPEAKER_05]: I just skip through most of them.

49:26.878 --> 49:30.782
[SPEAKER_05]: Yeah, but yeah, I really like that because the conversations are really interesting.

49:30.822 --> 49:42.472
[SPEAKER_05]: They cover quite a wide variety of things around between like neuroscience and business and men's health, women's health, economics and stuff like that, just quite a wide variety of things.

49:44.353 --> 49:45.214
[SPEAKER_05]: I really did that.

49:45.274 --> 49:47.697
[SPEAKER_05]: Otherwise, I'm listening to audiobooks.

49:47.777 --> 49:51.302
[SPEAKER_05]: Actually, if the only time I listen to music anymore is when I'm driving.

49:52.283 --> 49:57.350
[SPEAKER_05]: Um, so yeah, but like right now, let's see, what audio book am I listening to?

49:57.430 --> 49:59.372
[SPEAKER_05]: I have like four audio books going right now.

50:00.434 --> 50:01.535
[SPEAKER_05]: Uh, wow.

50:02.416 --> 50:21.576
[SPEAKER_05]: I'm listening to an audiobook called A World Appears and it's by Michael Paul and he wrote the book called this is your mind on plants as well as how to change your mind and essentially they're exploring where it is consciousness comes from and so I'm learning about that kind of kind of stuff.

50:22.698 --> 50:24.139
[SPEAKER_05]: Listening through that, but it's pretty heavy.

50:24.219 --> 50:25.220
[SPEAKER_05]: Like science heavy.

50:25.860 --> 50:30.844
[SPEAKER_05]: He's an investigative journalist and so he does like a really deep dive on these different subjects And it's really cool.

50:30.864 --> 50:40.052
[SPEAKER_05]: I like it a lot But it's heavy and so I had definitely I can do do about an hour at a time and then I have to take a break For it feels like my brain's gonna explode

50:40.558 --> 50:41.859
[SPEAKER_03]: I tell you what I use to like.

50:42.079 --> 50:43.500
[SPEAKER_03]: I use to like, freakingomics.

50:44.340 --> 50:44.960
[SPEAKER_03]: That was good.

50:45.100 --> 50:46.861
[SPEAKER_03]: The similar to that is NPR thing.

50:46.901 --> 50:51.704
[SPEAKER_03]: And then what was that NPR story that show about?

50:51.804 --> 51:00.028
[SPEAKER_03]: They were trying to find, it was a, they're trying to basically solve this crime about whether or not this guy killed this girl or something like that.

51:00.408 --> 51:01.189
[SPEAKER_05]: Was it called cereal?

51:01.593 --> 51:02.114
[SPEAKER_03]: Serial.

51:02.754 --> 51:03.535
[SPEAKER_03]: Serial.

51:03.555 --> 51:04.136
[SPEAKER_04]: Yeah, huge.

51:04.156 --> 51:05.297
[SPEAKER_03]: What's the serial season?

51:05.457 --> 51:08.360
[SPEAKER_03]: One is amazing and serial season two is even better.

51:08.981 --> 51:12.305
[SPEAKER_03]: So if you're looking for a podcast, you know, Serial is fabulous.

51:13.406 --> 51:20.393
[SPEAKER_03]: You know, one of the things about the podcast where the, especially the maker podcast that I really just, I just immediately have to turn it off.

51:20.794 --> 51:22.015
[SPEAKER_03]: When people start pondering,

51:22.876 --> 51:44.347
[SPEAKER_03]: Like when people, you know what I'm talking about, like they get all like there's a microphone in front of them and they start talking about politics and They act as if, you know, just because they know how to turn a screw that means they know everything and they just start pondering about, you know, why society is the way it is and my life is perfect and I don't ever say why yours is not.

51:44.827 --> 51:48.689
[SPEAKER_03]: When they start pondering, I'm like, I never want to listen to shit again.

51:49.109 --> 51:50.090
[SPEAKER_03]: Don't ponder.

51:51.190 --> 52:00.417
[SPEAKER_03]: Seriously, don't ponder, tell us story, don't talk to the audience, don't talk to them like you're trying to teach them something.

52:00.897 --> 52:03.880
[SPEAKER_03]: Tell us story, paint a story, they like it better.

52:04.060 --> 52:05.321
[SPEAKER_03]: When you start pondering,

52:06.525 --> 52:08.586
[SPEAKER_03]: It's terrible, you're not good at pondering.

52:08.907 --> 52:10.267
[SPEAKER_03]: Don't pond.

52:10.308 --> 52:16.732
[SPEAKER_03]: Not true, especially the maker, the maker guys, the maker podcasts, all the pondering about life.

52:16.812 --> 52:20.494
[SPEAKER_03]: And I know why this guy did that.

52:20.534 --> 52:24.257
[SPEAKER_03]: And I know what the problem in the world is.

52:24.297 --> 52:25.938
[SPEAKER_03]: And if I was the king, then I would...

52:26.718 --> 52:27.419
[SPEAKER_03]: Stop pondering.

52:27.439 --> 52:28.180
[SPEAKER_04]: You're not good at it.

52:28.581 --> 52:29.082
[SPEAKER_04]: Don't do it.

52:29.102 --> 52:30.003
[SPEAKER_04]: Is that an impression then?

52:30.243 --> 52:35.290
[SPEAKER_03]: No, but I mean, I think you have a four or five podcast right here pondering in like this.

52:35.330 --> 52:36.932
[SPEAKER_03]: He's whole year than now.

52:37.833 --> 52:40.357
[SPEAKER_03]: Guys, it's just like bro.

52:40.918 --> 52:42.339
[SPEAKER_03]: Your pondering is not for you.

52:42.860 --> 52:44.740
[SPEAKER_05]: Don't ponder about pondering right now.

52:44.860 --> 53:03.365
[SPEAKER_03]: I'm not pondering about I'm just explaining why I don't listen to them I'm giving you the real Real reasoning why I don't listen to these podcasts because these guys they have too high of opinion than those they ponder I'm a miserable guy, but when I tell a story I'd rather paint the picture than like explain you know do these abstract pondering bullshit

53:04.856 --> 53:06.117
[SPEAKER_03]: Don't part of, Ernaf.

53:06.837 --> 53:07.137
[SPEAKER_04]: Okay.

53:07.958 --> 53:11.960
[SPEAKER_04]: Well, I'm going to tell everybody all about texasfarersupply.com.

53:12.240 --> 53:14.121
[SPEAKER_04]: Go there to get anything you need.

53:14.161 --> 53:18.403
[SPEAKER_04]: Whether you're a Faria or whether you're a knife maker, bladesmith, whatever you want to call yourself.

53:18.443 --> 53:19.184
[SPEAKER_04]: They've got it all there.

53:19.204 --> 53:20.285
[SPEAKER_04]: Texasfarersupply.com.

53:21.265 --> 53:23.846
[SPEAKER_04]: And obviously, they sell in DASA Rhinoet.

53:24.206 --> 53:30.408
[SPEAKER_04]: So we always talk about hand sanding and what a bitch it could be at times, but in DASA Rhinoet makes it easier.

53:30.648 --> 53:31.749
[SPEAKER_04]: It's the best sandpaper out there.

53:32.049 --> 53:34.070
[SPEAKER_04]: Go take a look, Texasfiresupply.com.

53:34.390 --> 53:37.611
[SPEAKER_04]: Use knife-talk 10 at checkout and get 10% off your entire order.

53:37.871 --> 53:39.392
[SPEAKER_04]: The Texasfiresupply.com.

53:39.572 --> 53:40.192
[SPEAKER_04]: Don't bitch!

53:40.632 --> 53:41.372
[SPEAKER_04]: Use Rhinoet.

53:42.333 --> 53:43.273
[SPEAKER_04]: Don't bitch!

53:43.433 --> 53:44.874
[SPEAKER_04]: That's easier, seriously.

53:45.454 --> 53:48.475
[SPEAKER_03]: You can do some more questions or we have feedback wherever you want to do.

53:49.183 --> 53:50.343
[SPEAKER_03]: Let's do a bit of feedback, go for it.

53:50.363 --> 53:52.444
[SPEAKER_03]: I don't think that's good.

53:52.484 --> 53:56.185
[SPEAKER_03]: Guys, you can leave your feedback at Night Talk podcast.

53:56.205 --> 53:57.925
[SPEAKER_03]: On Instagram, that's where you interact with the show.

53:58.365 --> 53:59.825
[SPEAKER_03]: We need your beefs.

53:59.946 --> 54:02.026
[SPEAKER_03]: I have a few beefs, but we need a lot more beefs.

54:02.266 --> 54:03.226
[SPEAKER_03]: Me and more beefs.

54:03.866 --> 54:04.487
[SPEAKER_03]: Here's some Mr.

54:04.507 --> 54:04.867
[SPEAKER_03]: Feedback.

54:04.907 --> 54:11.808
[SPEAKER_03]: We talked to our friend Steve Ellis last week, and we were talking, I think, if you remember, Mareco.

54:13.089 --> 54:17.990
[SPEAKER_03]: He was using a coffee etch on some sand my, and it was becoming blotchy.

54:19.490 --> 54:19.790
[SPEAKER_05]: Thank you.

54:19.810 --> 54:21.151
[SPEAKER_05]: So very cool.

54:21.251 --> 54:24.593
[SPEAKER_03]: If our listeners are done and we're talking about going last week's episode, stop down.

54:24.673 --> 54:32.098
[SPEAKER_03]: Go to last week's episode and see Valice give us a dilemma and here's Steve Ellis's listener feedback.

54:32.138 --> 54:37.902
[SPEAKER_03]: Thank you all for answering my question about coffee etching, but unfortunately, school is not quite out.

54:38.462 --> 54:41.525
[SPEAKER_03]: The blotches were actually on the 1084.

54:42.006 --> 54:45.109
[SPEAKER_03]: I tried three separate times on the same piece.

54:45.229 --> 54:53.418
[SPEAKER_03]: I hand-sanded a 600 grit, then I etched in fabric when I was happy with the depth from a fabric I made sure to neutralize.

54:53.999 --> 54:55.460
[SPEAKER_03]: Then I wanted the contrast.

54:55.520 --> 54:58.581
[SPEAKER_03]: I washed the blade of the soap and water soaked in the coffee overnight.

54:58.982 --> 55:00.923
[SPEAKER_03]: It was blotchy on the 10804.

55:00.983 --> 55:03.464
[SPEAKER_03]: So I sanded it back, cleaned it up again, tried again.

55:04.044 --> 55:07.606
[SPEAKER_03]: This time, I'm in cold coffee for a full day, still bought blotchy.

55:07.686 --> 55:13.769
[SPEAKER_03]: I sanded it back again and mixed a new batch of coffee, the same stuff, and oreco uses, and I let it soak.

55:14.390 --> 55:15.690
[SPEAKER_03]: Still blotchy.

55:15.730 --> 55:17.791
[SPEAKER_03]: I got discouraged and hit it on the buffer.

55:21.033 --> 55:22.654
[SPEAKER_03]: Relic look so I went with it.

55:23.335 --> 55:24.656
[SPEAKER_03]: Did I wind up.

55:24.976 --> 55:26.878
[SPEAKER_03]: I did wind up selling eventually.

55:26.938 --> 55:44.412
[SPEAKER_03]: Thanks again for all you guys do I'm wondering if there's unretained oscillate You mean retained oscillate what did I say unretained retained right did oscillate didn't convert over to the martensight That's what I think okay

55:45.871 --> 55:51.737
[SPEAKER_05]: It could be possible, but I think that those areas would be microscopic.

55:52.017 --> 55:54.620
[SPEAKER_05]: There would be very challenging to see.

55:55.981 --> 55:59.044
[SPEAKER_05]: God, I wish now I wish I had a photo, but I have had

56:01.402 --> 56:13.049
[SPEAKER_05]: Almost kind of like this weird bubbling effect on the surface of the black show up and the black portions of the Damascus, especially when I have like solid black edges or something like that.

56:14.150 --> 56:20.114
[SPEAKER_05]: And honestly, the solution and it sounds like he did it though, it was to make a new coffee solution.

56:20.474 --> 56:29.160
[SPEAKER_05]: So then the only other thing I could really think of is that if he's going to the fairer first and then to the coffee, there's something funky happening

56:30.418 --> 56:31.078
[SPEAKER_05]: Uh, in the coffee.

56:31.558 --> 56:37.801
[SPEAKER_05]: Even though he it sounds like he's neutralizing it and rinsing it off or maybe even did he say he was washing it as well.

56:38.081 --> 56:39.641
[SPEAKER_05]: Yes, before going into the coffee.

56:39.661 --> 56:49.185
[SPEAKER_05]: Yeah, I don't know that there might that's the only thing I can attribute the possibility to I have actually stopped using ferric

56:50.345 --> 57:10.338
[SPEAKER_05]: For etching for any like the only time I use ferric actually the only time I use ferric is I I dip the blade in just for like 10 seconds to make sure the blade is clean Which means there's no like airant finger print or weird oil or acetone residue that's left on the blade before going into the coffee because that will

57:11.198 --> 57:15.220
[SPEAKER_05]: make it, it's closing off the surface from the coffee, right?

57:15.920 --> 57:26.285
[SPEAKER_05]: So if I see anything, then I wash it off, I wash the blade, usually just with some dish soap, mild dish soap and a soft sponge, and then I will check it again.

57:27.366 --> 57:30.367
[SPEAKER_05]: But when I go into the coffee, I have the blade scrubbed

57:37.230 --> 57:44.514
[SPEAKER_05]: The Oxide Oxide Oxide Oxide Oxide Oxide Oxides from the from the affairic.

57:44.994 --> 57:53.058
[SPEAKER_05]: I don't want any of the fairic oxides I have found that having the fairic under the coffee actually makes the coffee finish at least in my experience

57:54.212 --> 57:56.313
[SPEAKER_05]: the coffee finish more delicate.

57:56.934 --> 58:13.924
[SPEAKER_05]: So I don't do any ferric before to or I'm not relying on the ferric and then building up more darkness with the coffee, I strip all the ferric off any ferric oxide that might have occurred and then yeah and then I do my coffee.

58:15.649 --> 58:28.337
[SPEAKER_05]: So, but what's actually causing it could be some funkiness in the steel chemistry like you're saying, though, Jeff, there were some that I just could not get like a good finish on and I don't know what the fuck was happening.

58:28.878 --> 58:34.501
[SPEAKER_05]: I did all the things that I've suggested here and I still wasn't getting good results and so I don't know.

58:35.742 --> 58:38.464
[SPEAKER_05]: Who knows, but that's the answer.

58:39.144 --> 58:45.407
[SPEAKER_05]: Well, the thing of so in the coffee isn't working if you're getting a decent finish with a fairer Maybe you only do the fairer.

58:45.527 --> 59:00.255
[SPEAKER_05]: Just get a sharp fairer castle place So like especially higher chromium steels coffee actually is not as good at darkening higher like 5200 or crew forged v It's not the greatest at darkening those steels

59:01.035 --> 59:03.256
[SPEAKER_05]: Um, and Fairek is actually better for that.

59:03.456 --> 59:29.590
[SPEAKER_03]: So sometimes Fairek is the answer and just you just go with the Fairek edge So otherwise I don't know what else to tell you Go go get yourself some gator piss speak of which a little awesome Domestale a little just a quick listener note When any of us Ask for a photograph Senate directly to them because don't send photographs that I've talked podcast for only for this reason

59:30.310 --> 59:34.113
[SPEAKER_03]: I cannot transfer it over to an audio podcast.

59:34.473 --> 59:35.934
[SPEAKER_03]: It doesn't really make sense.

59:35.954 --> 59:37.635
[SPEAKER_03]: So when you, I know I appreciate it.

59:37.655 --> 59:39.276
[SPEAKER_03]: Everybody sends pictures every so often.

59:39.837 --> 59:44.180
[SPEAKER_03]: It's not going to be helpful to an episode of the show if you send a drawing, a picture.

59:44.460 --> 59:47.362
[SPEAKER_03]: But if, if, if Miracle asked for a picture, send it to him.

59:48.388 --> 01:00:01.414
[SPEAKER_03]: Yeah, but I mean I it's I can't really do hold out when I get pictures unless I ask for one still to help me explain something So sure yeah, yep, and we don't want pictures like we had last week of me in the bath.

01:00:01.455 --> 01:00:03.375
[SPEAKER_03]: We don't need pictures I didn't use it.

01:00:03.395 --> 01:00:14.081
[SPEAKER_03]: We don't need them I honored your I really really honored your your feelings that of not using that picture I was being respect for your wishes

01:00:15.604 --> 01:00:15.905
[SPEAKER_03]: Thank you.

01:00:15.925 --> 01:00:16.366
[SPEAKER_03]: You're welcome.

01:00:16.466 --> 01:00:17.227
[SPEAKER_03]: I appreciate this.

01:00:17.448 --> 01:00:18.310
[SPEAKER_03]: All the time.

01:00:18.851 --> 01:00:20.454
[SPEAKER_03]: You were saying something about Domesteele?

01:00:21.937 --> 01:00:22.418
[SPEAKER_03]: I was.

01:00:22.699 --> 01:00:23.300
[SPEAKER_03]: Yeah.

01:00:23.340 --> 01:00:24.422
[SPEAKER_03]: Tell people what Domesteele is.

01:00:24.442 --> 01:00:24.703
[SPEAKER_03]: Dude.

01:00:25.428 --> 01:00:34.490
[SPEAKER_03]: Domestyle is outstanding stainless Damascus pattern wall is steel and it's great.

01:00:34.610 --> 01:00:51.772
[SPEAKER_03]: And if you go to Damestyle.se you can put it in promo code knife talk 15 you get 15% off all your specialized don't fool around get yourself some Damestyle are men of Josh Princess don't be a fool use Damestyle and the Damestyle invitation is it this coming

01:00:57.652 --> 01:00:59.354
[SPEAKER_03]: Well, am I out here by myself?

01:00:59.874 --> 01:01:00.835
[SPEAKER_03]: Hey, Craig, Craig.

01:01:01.255 --> 01:01:02.356
[SPEAKER_03]: When is the DCI?

01:01:04.879 --> 01:01:05.519
[SPEAKER_05]: He's muted.

01:01:05.960 --> 01:01:07.221
[SPEAKER_03]: Craig, you are muted.

01:01:08.082 --> 01:01:09.223
[SPEAKER_03]: You can Craig muted himself.

01:01:09.263 --> 01:01:10.044
[SPEAKER_03]: He's like, I don't worry.

01:01:10.064 --> 01:01:10.704
[SPEAKER_03]: I'll take care of it.

01:01:10.724 --> 01:01:11.945
[SPEAKER_04]: So, yeah, I'm here.

01:01:11.965 --> 01:01:12.986
[SPEAKER_04]: I'm on the domicile side.

01:01:13.046 --> 01:01:13.547
[SPEAKER_04]: They're with me.

01:01:13.667 --> 01:01:14.688
[SPEAKER_04]: Oh, nice.

01:01:14.708 --> 01:01:15.108
[SPEAKER_04]: Jeez.

01:01:15.428 --> 01:01:15.709
[SPEAKER_04]: Jeez.

01:01:16.509 --> 01:01:17.610
[SPEAKER_04]: The 14th of November.

01:01:17.631 --> 01:01:18.591
[SPEAKER_04]: 14th of November.

01:01:18.671 --> 01:01:19.412
[SPEAKER_04]: 14th of November.

01:01:19.432 --> 01:01:20.233
[SPEAKER_04]: Come on, I'll be right there.

01:01:21.656 --> 01:01:26.659
[SPEAKER_03]: Yeah, and we're going to we're everyone's going to be at the Damasteel DCI Invitational.

01:01:26.699 --> 01:01:27.919
[SPEAKER_03]: We're going to have a lot of fun.

01:01:28.279 --> 01:01:29.720
[SPEAKER_03]: It's it's in like a little over.

01:01:29.760 --> 01:01:34.843
[SPEAKER_03]: It's like almost a week almost Two weeks two Saturdays for that day.

01:01:35.123 --> 01:01:47.850
[SPEAKER_03]: So we're going to we're going to all go to the DCI go to DCI and then sign up and then you can join us We're going to do the DCI invitation will we'll have a booth and we'll be you'll be able to see all your friends You'll be able to vote on the best stuff

01:01:48.750 --> 01:01:51.752
[SPEAKER_03]: And for sure, for sure, for sure, you should join this every year.

01:01:51.772 --> 01:01:57.675
[SPEAKER_03]: It's always fun, and we're going to do a live Domestie on you'll be able to interact with us live, which is fun.

01:01:57.695 --> 01:01:58.175
[SPEAKER_05]: Super fun.

01:01:58.716 --> 01:02:00.096
[SPEAKER_05]: I did my soundtrack the other day.

01:02:00.517 --> 01:02:00.937
[SPEAKER_03]: Oh, shit.

01:02:00.957 --> 01:02:01.777
[SPEAKER_03]: I haven't done anything.

01:02:02.118 --> 01:02:02.818
[SPEAKER_03]: What am I supposed to do?

01:02:02.838 --> 01:02:04.299
[SPEAKER_05]: I think, I don't know.

01:02:04.639 --> 01:02:07.140
[SPEAKER_05]: We got a email from Carly.

01:02:07.360 --> 01:02:10.042
[SPEAKER_05]: It's just checking, it's just checking the sound audio.

01:02:10.062 --> 01:02:13.003
[SPEAKER_05]: If anybody's got any questions, I think you're probably going to be good.

01:02:13.204 --> 01:02:13.704
[SPEAKER_05]: I did mine.

01:02:13.724 --> 01:02:14.564
[SPEAKER_05]: But.

01:02:16.263 --> 01:02:17.044
[SPEAKER_05]: Yeah, it was good.

01:02:17.384 --> 01:02:20.527
[SPEAKER_05]: It was, it was cool to chat with Carly just for a second.

01:02:20.567 --> 01:02:22.109
[SPEAKER_05]: It sounded like she had a good time in Austria.

01:02:23.870 --> 01:02:31.998
[SPEAKER_05]: And hang it out at the Austrian knife show as well as with over it to be as hunglers shop where he did.

01:02:32.259 --> 01:02:35.702
[SPEAKER_05]: He had some people forging and he also did like a chef's knife camp.

01:02:36.543 --> 01:02:38.485
[SPEAKER_05]: And yeah, that's a good time.

01:02:38.885 --> 01:02:42.588
[SPEAKER_05]: I got a call to feel like I'm missing out or not to feel like you're missing out.

01:02:42.628 --> 01:02:44.911
[SPEAKER_05]: It looks like it's It's like a good time.

01:02:45.011 --> 01:02:45.431
[SPEAKER_03]: It's fun.

01:02:45.511 --> 01:03:02.366
[SPEAKER_03]: I got a call from Somebody somebody there was a they're all out of restaurant and Tom or Botner and Fingle got a call with me and they just started telling me how much fun they were having and the both of them said the biggest running joke was we're having so much fun you would have hated it

01:03:03.207 --> 01:03:05.768
[SPEAKER_03]: That was their company me and I said you're right.

01:03:05.848 --> 01:03:14.631
[SPEAKER_03]: I probably wouldn't have hated it, but for other reasons But so I have I have established myself as being one of the more miserable people on the planet Which is a commodity.

01:03:15.071 --> 01:03:15.692
[SPEAKER_03]: Yes, fine.

01:03:15.892 --> 01:03:16.852
[SPEAKER_03]: I'll find I'll take it.

01:03:17.412 --> 01:03:20.613
[SPEAKER_03]: This next feedback comes from our man Hone by Jones.

01:03:20.633 --> 01:03:23.114
[SPEAKER_03]: This is a sharpening a whole sharpening.

01:03:23.154 --> 01:03:24.375
[SPEAKER_03]: He sent us the man of Festa

01:03:25.075 --> 01:03:33.859
[SPEAKER_03]: Please, please, please, please, please, please, please, please, please, please, please, don't send us the magna carda, but we're with home by Jones.

01:03:33.879 --> 01:03:35.079
[SPEAKER_03]: These are our guy warned as the man.

01:03:35.639 --> 01:03:44.283
[SPEAKER_03]: All right, home by Jones has sent us a message at knife-talk podcast and you said Jeff's comments about customers not expecting good customer service was brilliant.

01:03:44.843 --> 01:03:49.627
[SPEAKER_03]: Customers are often shocked that I call slash tech slash email them back promptly.

01:03:50.087 --> 01:03:53.750
[SPEAKER_03]: Customers are often shocked that I guarantee the sharpening work that I do.

01:03:54.611 --> 01:04:01.056
[SPEAKER_03]: Changing subjects from Morocco, the biggest lesson I have learned in the sharpening service is that it's my sharpening service.

01:04:01.556 --> 01:04:06.219
[SPEAKER_03]: You can set whatever business boundaries you want, sharpen paper cutters, don't sharpen paper cutters.

01:04:06.680 --> 01:04:07.520
[SPEAKER_03]: It's your business.

01:04:07.560 --> 01:04:09.922
[SPEAKER_03]: If you want to avoid burnout, make it truly yours.

01:04:09.982 --> 01:04:10.983
[SPEAKER_03]: Set up your services.

01:04:11.423 --> 01:04:15.086
[SPEAKER_03]: So you don't feel that you're making solid money without gouging people if you can't.

01:04:15.506 --> 01:04:23.472
[SPEAKER_03]: I've constantly remind myself, I have to constantly remind myself that I don't have this set up, that I don't have to set up my business like every other sharpener does.

01:04:23.932 --> 01:04:27.916
[SPEAKER_03]: the curse of being in business for yourself is that you have to make all the decisions.

01:04:28.356 --> 01:04:31.840
[SPEAKER_03]: The joy of being in business for yourself is you get to make all the decisions.

01:04:32.500 --> 01:04:34.262
[SPEAKER_03]: Also from Raccoon, he's not done.

01:04:34.362 --> 01:04:35.403
[SPEAKER_03]: He's not done getting to you.

01:04:35.583 --> 01:04:36.464
[SPEAKER_03]: He's sitting up straight.

01:04:36.944 --> 01:04:37.985
[SPEAKER_03]: He wants you to sit up straight.

01:04:38.085 --> 01:04:39.187
[SPEAKER_03]: He's taking notes.

01:04:39.427 --> 01:04:40.708
[SPEAKER_05]: You better sit up straight, take notes.

01:04:40.768 --> 01:04:42.169
[SPEAKER_05]: Home by Joe got something else to say.

01:04:42.189 --> 01:04:42.630
[SPEAKER_05]: I'm forward.

01:04:43.150 --> 01:04:52.795
[SPEAKER_03]: All's eyes forward, Mereko, set up, set up, set up, from Mereko mentioned the fee finishes on buffing wheels that creates a very polished edge.

01:04:52.975 --> 01:05:03.440
[SPEAKER_03]: I think many people are used to feeling an edge with some more bite because of the shitty edges that budges budget knife sharpeners like to use with pull-through do-dad.

01:05:04.061 --> 01:05:10.264
[SPEAKER_03]: That pull-through do-dad's create, which might explain why a more polished edge may be confusing.

01:05:10.844 --> 01:05:13.226
[SPEAKER_03]: Even though it's actually super sharp.

01:05:13.846 --> 01:05:26.353
[SPEAKER_03]: That is just a guess by the way Would you like to respond or say anything or Oh, no, we lose Chad Fuckers gone.

01:05:26.693 --> 01:05:29.094
[SPEAKER_03]: Racco's gone Craig are you gone?

01:05:29.234 --> 01:05:30.755
[SPEAKER_04]: I hate Maraco you hear I'm here.

01:05:30.915 --> 01:05:31.515
[SPEAKER_04]: I hear Maraco.

01:05:31.555 --> 01:05:31.816
[SPEAKER_04]: You do?

01:05:31.836 --> 01:05:35.117
[SPEAKER_04]: Yeah, I don't he's in the morning We get all split up.

01:05:35.137 --> 01:05:37.038
[SPEAKER_05]: That's isn't seen Maraco for just seconds.

01:05:37.219 --> 01:05:37.959
[SPEAKER_05]: I don't hear you Craig

01:05:39.657 --> 01:05:40.459
[SPEAKER_04]: Oh, okay.

01:05:40.559 --> 01:05:45.126
[SPEAKER_04]: Well, I hear Jeff and I hear Maracco, so maybe I'll be the the in-between.

01:05:45.146 --> 01:05:49.413
[SPEAKER_03]: Oh, I mean, this is going to be really close to each other, but I can't.

01:05:49.453 --> 01:05:50.776
[SPEAKER_03]: Yeah, he's not even the other thing.

01:05:51.834 --> 01:05:57.757
[SPEAKER_04]: So Barack, say anything you want to Jeff right and I'll relay it back to him Okay, tell me what you think about Jeff.

01:05:57.777 --> 01:05:58.658
[SPEAKER_04]: You can't hear you, Mariah.

01:05:58.678 --> 01:05:59.038
[SPEAKER_04]: Go ahead.

01:05:59.078 --> 01:06:02.200
[SPEAKER_03]: I can't tell you what you're saying anything Bad, I don't want this back.

01:06:02.220 --> 01:06:04.001
[SPEAKER_03]: Can you say anything to Jeff.

01:06:04.081 --> 01:06:05.641
[SPEAKER_04]: I tell you, but you can't say that, Barack.

01:06:05.701 --> 01:06:07.282
[SPEAKER_04]: Oh, Barack, you cannot say that.

01:06:07.542 --> 01:06:08.143
[SPEAKER_03]: It says he's left.

01:06:08.263 --> 01:06:09.103
[SPEAKER_03]: It says he's left.

01:06:09.123 --> 01:06:09.624
[SPEAKER_03]: He's the nice guy

01:06:10.975 --> 01:06:12.297
[SPEAKER_03]: It says he's left this fucking guy.

01:06:13.619 --> 01:06:14.841
[SPEAKER_04]: I don't know what we're gonna do here.

01:06:15.302 --> 01:06:16.203
[SPEAKER_04]: I don't know what we're gonna do.

01:06:16.223 --> 01:06:17.866
[SPEAKER_04]: Why don't we come in and record it?

01:06:17.886 --> 01:06:18.567
[SPEAKER_04]: We record it.

01:06:18.607 --> 01:06:22.072
[SPEAKER_03]: Have a nice little, you know, just get out of here and have a nice little landing.

01:06:23.492 --> 01:06:23.812
[SPEAKER_04]: Okay.

01:06:24.433 --> 01:06:24.713
[SPEAKER_04]: Okay.

01:06:24.893 --> 01:06:25.173
[SPEAKER_04]: Okay.

01:06:25.673 --> 01:06:29.456
[SPEAKER_04]: Before we do, Jeff, what grind to use?

01:06:29.616 --> 01:06:37.300
[SPEAKER_03]: I'm using a 2x72 from our man, from our men at full, broad back iron works.

01:06:37.761 --> 01:06:42.284
[SPEAKER_03]: Broad back iron works makes amazing grinders and I'm really proud to be using my grinder.

01:06:42.684 --> 01:06:44.225
[SPEAKER_03]: But I have a big news for them.

01:06:44.865 --> 01:06:51.788
[SPEAKER_03]: A broad-backed iron works has been acquired by, well, the assets of broad-backed iron works has been acquired by C.A.

01:06:51.808 --> 01:06:52.248
[SPEAKER_03]: Chanson.

01:06:52.688 --> 01:06:57.530
[SPEAKER_03]: Now, you might be wondering what that means for Ryan and the, and, and those grinders will, Ryan isn't going anywhere.

01:06:57.910 --> 01:06:58.990
[SPEAKER_03]: He's joining C.A.

01:06:59.010 --> 01:07:06.213
[SPEAKER_03]: Chanson, a senior engineer, continuing to lead grinder in metalworking equipment that continue to support knife makers.

01:07:06.253 --> 01:07:09.234
[SPEAKER_03]: Some module platform, same commitment to American manufacturing.

01:07:09.654 --> 01:07:17.581
[SPEAKER_03]: The difference now has got 160 years of American manufacturing behind them, more resources, more engineering support, more opportunities to keep pushing the up craft.

01:07:18.021 --> 01:07:24.507
[SPEAKER_03]: So go to broadbackironworks.com and then you can put in the promo code knife to talk 10 for 10% off everything.

01:07:25.913 --> 01:07:26.373
[SPEAKER_03]: There we go.

01:07:26.673 --> 01:07:27.094
[SPEAKER_03]: There we go.

01:07:28.154 --> 01:07:32.096
[SPEAKER_04]: Um, yeah, I'm sorry about this guys, everyone listening, um, we've had some gramblins.

01:07:32.196 --> 01:07:44.363
[SPEAKER_04]: So for some reason, we've all been, we've all been separated for the internet, um, but we will be back next week as usual, um, so yeah, um, we should see you next week, bye for now.

01:07:44.423 --> 01:07:45.123
[SPEAKER_04]: Thank you for listening.

